Carbon Dioxide Storage Tank factory
The design of liquid carbon dioxide storage tanks mainly involves the design and strength check of the inner and outer cylinders, and the structural design. On this basis, a complete set of design calculation methods suitable for cryogenic pressure vessels is obtained. The research results are for the design of cryogenic pressure vessels. It has important theoretical significance and practical application value. Design a set of full-size liquid carbon dioxide storage tanks to provide reference for the design of similar equipment. Carbon dioxide gas, an industrial product, is widely used in various countries' chemical, metallurgical, pharmaceutical, aerospace and other industries. Liquid carbon dioxide storage tank The liquid carbon dioxide storage tank is used to facilitate the storage or transportation of this important industrial gas. This equipment is a common equipment in the industrial industry. It has a wide range of uses, good practical effects, long service life, compact structure, and Features such as small land area, centralized control, convenient operation and maintenance. Liquid carbon dioxide storage tank container assembly: 1 The container assembly process and process require the cylinder to be scribed. First draw the four reference lines of 0, 90, 180, and 270 degrees, and then draw the center of each opening according to the construction drawing Line and opening edge line. Make holes, cut and grind the holes, and clean the groove surface with a file for small holes. When connecting pipe and flange assembly welding, when connecting pipe and flange assembly, the inclination of flange end surface shall not be greater than 1% of flange outer diameter and not greater than 3mm. For welding, see the welding process card.Carbon Dioxide Storage Tank factory website:http://www.tankmadeinchina.com/cryogenic-storage-tank/carbon-dioxide-storage-tank/
Посмотреть всю страницу