Customized Shading Net Loom Machine
Product Introduction PP PE fabric water jet loom machines are generally monochromatic or dichromatic, with some looms up to 3 colors. After more than ten years of weaving practice, the domestic water-jet looms show that all kinds of water-jet looms have a very wide range of adaptability, and there are silk fabrics and all kinds of chemical fiber fabrics in a large number of industries. Product Parameter TypeWater jet loom Working width/ Reed space1300mm(51.2in) 1500mm(59.2in) 2100mm(82.7in) 2200mm(86.7in) 2350mm(92.5in) 2500mm(98.4in) 2600mm(102.4in) 2800mm(110.2in) Manufactured by customer requirement FrameBox type Power/DrivingMain motor: 2.2kw BeatingCrank type SheddingTappet Shedding for 2,4 heald frame Let-off let motionGrell system bent axle? Manufactured by customer requirement WindingAttachment of automatic ally tertian-controlled Motor Maximum winding Dia.: 1000mm Weft supplyMechanical type measuring and freeding system Manufactured by customer requirement Stop motionElectronic system weft stop motion Revolutions Per Minute SS-HL 1300350-800RPM SS-HL 1500350-800RPM SS-HL 2100350-750RPM SS-HL 2200350-750RPM SS-HL 2350350-750RPM SS-HL 2500350-700RPM SS-HL 2600350-700RPM SS-HL 2800350-700RPM Product Photos FAQ Product characteristic. The main structure of PP PE fabric water jet loom machines as follows: (1) Weft insertion system: high pressure pump and cluster nozzle are generally used, there are two forms: single pump and double pump. (2) Opening system: generally speaking, crank connecting rod opening and multi-arm machine opening can be used, and cam opening mechanism can also be used. (3) Beating-up system: the four-bar beating-up mechanism is generally used. (4) Let-off system: mechanical let-off mechanism or electronic let-off mechanism is generally used. (5) Coiling system: active continuous coiling mechanism, can also be equipped with electronic coiling mechanism. (6) Edge hanging device: the edge mechanism of the planet wheel rope is installed. (7) Scissors device: generally used mechanical cutting, but also electrothermal cutting. (8) Cloth support device: static or floating weaving, with upper or lower cloth brace, or full width edge brace. (9) Waste silk treatment mechanism: the cut edge is twisted and pulled out by twisting the spindle. (10) Lubrication system: the main transmission system is lubricated by oil bath, and some parts are lubricated by hand pump or manual regular refueling. (11) Control system: single chip microcomputer control system and PLC or PCC control system are used, which have various detection and control functions.Customized Shading Net Loom Machine website:http://www.xinshunshuomachinery.com/shading-net-loom-machine/
Посмотреть всю страницу