Fire-Rated Metal Door

Fire-Rated Metal Door [url=http://www.jiahuicorp.com/fire-rated-steel-door/]Fire rated steel doors[/url] ;play a vital role in keeping people safe and minimizing property damage during a fire. Labeled fire doors control the spread of fire and smoke for up to 3 hours. Metal fire doors are an economical alternative to wood fire doors when more than a 20-minute rating is required. Steel is the sole door material to deliver a 3-hour fire rating. Tudor is an authorized WHI fire-labeled shop (Warnock Hersey / Intertek), enabling us to modify, re-certify and label fire-rated doors and frames. And we are certified by UL to cut, re-certify and label fire-rated glazing materials. Our facility undergoes routine inspections to verify that modifications are done in compliance with the requirements of the Intertek and UL specification listings. All material is tested in accordance with NFPA codes and standards. Steel Fire Proof Door [url=http://www.jiahuicorp.com/fire-rated-steel-door/steel-fire-proof-door/]Steel Fire Proof Doors[/url] ;and frames play a critical role in keeping people safe and minimizing property damage. Doors play a very important role in the fire resistance of a building; they allow people to evacuate safely from a building along with limiting the spread of fire and smoke to other areas. Fire doors must meet the requirements of the International Building Code and International Fire Code, as well as the NFPA 80 Standard for Fire Doors and Other Opening Protectives. Fire ratings range from 20 minutes to 3 hours. Hollow metal is the only door material widely available with a 3-hour label. Steelcraft’s fire rating capabilities include the use of ceramic glass and special glazing compounds. The following link will take you to Technical Glass Product's FireLite? fire-rated glass technical data specifications, which list all of the maximum size limitations along with fire ratings. The Essential Information About Emergency Exit Doors In an emergency, it's critical that people can evacuate the building quickly and safely. Normal entry (and exit) doors are not usually designed for a large number of people to try and exit all at once, which could spell disaster in an emergency situation. A large number of people trying to escape out of one small exit point at the same time is dangerous; people risk being trampled or otherwise injured, by not being able to evacuate the building in time. There are three primary types of [url=http://www.jiahuicorp.com/fire-rated-steel-door/emergency-exit-door/]emergency exit doors[/url] Fire doors These doors are made of material that is fire resistant and enters into fireproof tunnels or stairways. The frame is also made from fire-resistant steel, affording a safe escape route when faced with fire. Exit doors You’ve no doubt seen these doors when you visit a Shopping Centre or other public place. They’re clearly marked with those instantly recognizable green and white ‘EXIT’ signs and are in easily accessible places for a quick exit when needed. If an exit door doesn’t lead to a fireproof stairwell or tunnel, it does not need to have a steel frame or be made of fire-resistant material. Path of travel doors These are the doors in escape walkways that lead to (or are between) an exit or fire doors. 3 Benefits of Steel Doors in Industrial & Commercial Use 1. Many qualities of [url=http://www.jiahuicorp.com/steel-door/]steel doors[/url] make them appealing to industrial engineers and commercial architects. Steel Doors Provide Long-Term Value Steel provides the best long-term value for doors, whether you’re looking for the entire door or just the frame. The initial cost of a steel door is often less than the cost of a fiberglass one, however, steel doors can sometimes cost more than similar wooden doors. Wooden doors may offer opportunities for a handsome, customized, natural look, but ones featuring intricate design or high-quality wood quickly become expensive, often becoming more expensive than an equivalent steel door. REPAIR & MAINTENANCE Many engineers and architects feel that they can save money by purchasing wooden doors when in reality they’re sacrificing cost-effectiveness. Since wood absorbs moisture easily, it can peel, bubble, warp, twist, & bow. Replacing or repairing these damaged doors can be extremely expensive. If you’re looking for long-term value, metal doors are key, routinely lasting 30 years (or more) with proper care. If they do happen to need maintenance or repairs, costs are often much lower than repair costs for similar wooden doors. 2. They Provide Both Increased Safety & Security PROVIDING SAFETY FROM FIRES In most cases, steel doors are designed with fire resistance (and other safety measures) in mind, though it should be noted that not all steel doors with frames are fire-resistant. The same can be said for certain wooden doors; some wooden doors can be fire-rated. ; In general, fire-resistant steel doors offer a 20-minute fire rating. In case of a fire, they can handle dangerous heat levels for up to 20 minutes, allowing the building's occupants ample time to reach safety. Each steel door is adorned with a fire-rating sticker that indicates just how long it will hold up in the event of a fire. PROVIDING SECURITY FROM UNAUTHORIZED ACCESS Security is essential for commercial buildings that deal with large quantities of inventory or cash. Steel doors are much harder to manipulate or break down than wooden doors, preventing unauthorized and uninvited access to the building's interior. Steel doors are also often chemical resistant and bulletproof, whereas wooden and fiberglass doors are not. 3. They're Designed To Outlast Their Wooden Counterparts Wooden doors require routine maintenance when in contrast, steel doors require little to no maintenance Steelworks is best in exterior-facing doors that need to withstand heavy traffic and brave the elements. Since steel doors offer insulating properties, they can even lower your building’s temperature-control costs. Wooden doors, however, are not nearly as energy-efficient. Even though steel doors can become scratched or dented somewhat easily, they're simple to repair and rarely require a time-consuming replacement as often as fiberglass or wood options. Metal Frames, Fire Doors & Nosings Fire/ Non-fire rated EG primer coated frames. Our mild steel frame for entrance doors and metal gates comes with CED coated. Our mild steel frame can be used for Timber/PVC doors in Bedrooms & Toilets. Frames can be in single or double rebates. Fire Rated [url=http://www.jiahuicorp.com/steel-door/metal-door/]Metal Door[/url] Our standard range of EG steel door frames is 1.5mm thick and doors in 1.2mm thick electro-galvanized steel sheet. Our steel doors are fire-rated and tested up to 4-hours complying with Singapore standard SS 332:2007 CI 4 suitable for use in commercial & industrial buildings. Customized profiles and sizes are available. Stainless steel nosings are available in SUS Grade 304 & Grade 316. Come with galvanized fishtail holdfast that is fixed to stainless steel nosing. What Are the Advantages of Exterior Steel Doors? [url=http://www.jiahuicorp.com/steel-door/exterior-steel-doors/]Exterior Steel Doors[/url] ;offer the most strength and durability out of all the materials. Certainly, one of the most premium selections when it comes to entry doors – we’ll take a more extensive look at what makes this the case in the following. Steel Door Durability Along with being highly secure, steel entry doors prove to be some of the most durable and long-lasting on the market. ; These stout doors are built to withstand the elements and provide you with years and years of steady service. Most steel doors are manufactured using 20-26 gauge steel which is quite sturdy and reliable. One thing that has to be considered with wooden doors is their propensity to warp and distort – steel will never have these issues no matter what the moisture content of the air. Steel also has the highest tolerance to overall weather conditions out of all the entry door options – it can stand up to the fiercest rainstorms and gusting wind without issue. Low Maintenance with Steel Doors Really the only maintenance that needs to be enacted on steel doors is touch-up painting whenever there is active damage done to the door. ; This sets it as being one of the lowest maintenance options when it comes to entry doors. [url=http://www.jiahuicorp.com/]Hospital doors[/url] ;include lead doors for X-ray rooms, hospital patient room doors, ICU doors, etc. Good hospital door design plays an important role in preventing cross-contamination as well as providing fire and x-ray protection, maintaining correct room pressures, and ensuring optimum operating efficiency. Doors for hospitals are also being widely used in other places such as medical centers, healthcare centers, or electronic factories. There are some advantages of the Xinyi hospital door design: hermetic seals, eco-friendly, easy to clean, anti-bacteria. As a professional hospital door manufacturer, Xinyi can provide you with different types of hospital doors with different dimensions and parameters at a consistent quality. 


Посмотреть всю страницу