Resin Sand Production Line suppliers
S52IV Eddy current regenerator USE： This equipment is mainly used for the regeneration of resin sand and water glass sand in the foundry. Characteristics： 1. This machine adopts the principle of vortex regeneration, which mainly uses the rubbing between old sand particles to achieve the purpose of demoulding and rounding the sand. 2. The old sand automatically forms a cushion for the basin in the regeneration basin to protect the regeneration basin from wear. 3. The throttle plate is installed on the outer side of the regeneration basin, which can effectively ensure the reliable regeneration of the sand, and the sand will not be broken during the regeneration process, and the roundness of the sand is better and more regular. 4. The old sand after regeneration can effectively reduce the amount of liquid material added, and the lower part is equipped with a secondary air selection mechanism to discharge the inert film and dust in the reclaimed sand. Technical Parameters： ModelS525IVS528IVS5210IVS5215IV Productivity（t/h）5-78-1010-1215-20 Motor Power（KW）2X42X5.52X112X22 Film release rate（%）≥28% Micron content（%）≤5% Recycling rate（%）≥90%Resin Sand Production Line suppliers website:http://www.nuoxin-machine.com/sand-treatment-production-line/resin-sand-production-line/
Посмотреть всю страницу