Доска объявлений

astao348

• Создано: 07-09-20
• Последний вход: 07-09-20

×

Контакты

Имя

Электронная почта

Сообщение

Код

Отправить сообщение

HDPE Pipe

Описание: SDR9 high pressure water pipe 1, Specification of HDPE high pressure water pipe The raw material of SDR9 high pressure water pipe is HDPE. HDPE resin is a high-density polyethylene with excellent chemical stability, resistance to aging and environmental stress cracking. Applicable temperature range -40 鈩?40 鈩? strong pressure capacity, and has good comprehensive mechanical properties. 2, The characters 1. Corrosion resistance-PE is an inert material that can resist the erosion of various chemical media; 2. No leakage- HDPE adopts electric hot melt connection, hot melt butt joint, hot melt socket connection, and its interface strength is higher than that of the pipe body; 3. High toughness- HDPE elongation at break generally exceeds 500%, adaptability to uneven settlement of the pipe base is very strong, and seismic performance is excellent; 4. Excellent resistance to slow crack growth (SCG) and rapid crack growth (RCP); 5. Excellent flexibility and anti-scratch ability; 6. Strong abrasion resistance, low friction coefficient of the pipe wall, small flow resistance, and strong conveying capacity; 7. A variety of non-excavation methods can be used, which is very convenient for construction and installation; 8. The system cost is low and the maintenance cost is low, which can greatly reduce the engineering cost; 3, The installation of hot-melt butt welding Operation steps: 鈥?/p> 1. Place the two PE pipes to be installed and connected on the hot-melt fixture at the same time (the fixture can change the clamp block according to the pipe diameter to be installed), and the other end of each pipe is held up to the same level with a pipe bracket . 鈥?/p> 2. Cut the ends of the pipes with an electric rotary knife to ensure that the contact surfaces of the two pipes can be fully matched. 鈥?/p> 3. Raise the electric heating plate to 210鈩? place it in the middle of the end faces of the two pipes, and operate the electro-hydraulic device to make the end faces of the two pipes and the heating plate completely contact and heat at the same time. 鈥?/p> 4. Remove the heating plate and operate the hydraulic device again to fully butt the end faces of the two pipes that have been melted and lock the hydraulic device (to prevent rebound). 鈥?/p> 5. Keep a certain cooling time to release, the operation is completed. 鈥?/p> 6. After the construction is completed, the buried test can only be put into use after passing the pressure test and acceptance. 4, Company 5, Contact us HDPE Pipe website:http://www.olivepipecn.com/plastic-pipe/hdpe-pipe/

Дата Публикации: 07-09-20

Sealed Silicone Grease Lubricant Free Sample

Описание: Recommended applications:Suitable for low temperature, ultra-low torque requirements of all kinds of micro and small high-speed bearings, low load high-speed ball screw, light load high-speed linear guide rail, light load gear, PCB drilling machine, SMT semiconductor industry dust room equipment, CNC machine tool spindle, measuring instruments, flange; Silent requirements of various motors, power tools, office equipment lubrication. It is especially recommended for robot gearbox Packaging:500G銆?KG銆?6KG銆?8KG銆?80KG.(Customized packaging is available) Typical data Test ItemDetection StandardUnitValue AppearanceVisual inspection-Yellow 40 kinematic viscosityGB/T265mm2/s84 Cone Penetration锛? times锛?5鈩?/p>GB/T 2691/10 mm391 Evaporation capacity(22h,100鈩?GB/T 7325%0.71 Four-ball extreme pressure PBGB/T 3142N1186 Four-ball extreme pressure sintering loadPDGB/T 3142N2450 Copper Strip corrosion(100鈩冿紝22h)GB/T 7326Method BLevel4a Service temperature-鈩?/p>-30-130 Color:Yellow Cone into the degree of:410 Expiration date:The shelf life of unopened products at room temperature is 36 months from the date of manufacture. If you request and where possible, we are very happy to provide you with free samples for testing. ODSI products have been continuously improved, so Otis reserves the right to modify the technical information of product information at any time without having to Notice.Sealed Silicone Grease Lubricant Free Sample website:http://www.odsigroup.com/sealing-lubricant/sealed-silicone-grease-lubricant/

Дата Публикации: 07-09-20

sell O/p-Toluene Sulfonic Acid Methyl Ester

Описание: Methyl o/p-Toluenesulfonate (OPTSM) is used in the production of dyes and organic synthesis. Product descriptions: Product Name: O/P-Toluene Sulfonic Acid Methyl Ester; Methyl o/p-toluenesulfonate; Methyl O/P-Toluene Sulfonate; CAS No. 28804-47-9 Molecular Formula: C8H10O3S Molecular Weight: 186.23 Structural Formula: EINECS No.: 249-237-3 Technical Specification: Appearance: Colorless or light yellow clear liquid Purity: 鈮?9% O- TSM: 40-70% P- TSM: 30-60% M-TSM: 鈮?% Moisture: 鈮?.5% Free acid: 鈮?.2% OPTSC: 鈮?.3% Ash锛氣墹0.1% This is our general specifications, we could manufacture the product as per your required specifications. Usage: Used as a methylation agent of organic synthesis, synthetic dyes pharmaceutical, pesticide, etc. Packing: 200kg plastic drum or 200kg plastic lined iron drum Loading port: Qingdao seaport by FCL shipment, Shanghai Seaport by LCL shipment, or as your requirement. Markets: our product are sold to domestic and foreign markets, depending on unbreakable product quality, our products has won the recognition and trust of international and domestic customers, customer satisfaction remains 100%. 1. What is your advantage compared with your competitors? (1). Qualified Manufacturer (2). Reliable Quality Control (3). Competitive Price (4). High Efficiency working (24*7hours) (5). One-Stop Service. 2. Have your products been exported? A: Yes, they have been exported to USA, Canada, Australia, Russia, Vietnam, Indonisia, Japan, South Korea, Netherland, Germany, Brazil, Poland, Thailand, Pakistan, Philippines, Singapore, Taiwan and so on. 3. Can the products be manufactuered by customer's requirement? A: Yes, the specifications stated above are the standard ones, we can manufacture the product as per your requirement. 4. Visting factory is allowed or not? A: Yes, we welcome customers visiting our factory, our factory is located in Houzhen Industrail park, Shouguang, Shandong, China. Before you take off from your country, please let us know. We will show you the way and arrange time to pick you up if possible.sell O/p-Toluene Sulfonic Acid Methyl Ester website:http://www.nuomengchemical.com/intermediates/o-p-toluene-sulfonic-acid-methyl-ester/

Дата Публикации: 07-09-20

Led Votive Candles factory

Описание: Nantong Yatai candle Arts and Crafts Co., Ltd is a manufacture from Jiangsu China,the factory owns complete develop production sales and after-sales team.We use our technique and experience to offer great quality and price product to our customer.Help customer builds and develop their own brand is our core,feel free to visit and purchase from us. 1. Introduction Products Description Flameless votive candles Item No.NT-JYB-039 MaterialParaffin wax+LED Size5x6.5cm ColorWhite MOQ1000pcs UsageWedding party and home decoration Remote8 keys remote (timer,dim to light,on/off) OEMAvailable Custom DesignAccept 2. Advantages Led candle manufacturer from Jiangsu china,welcome to visit us! 1. All products must go through five checks before manufacturing process 2. Relevant material check before production 3. Full check after every individual process finished 4. Full check after production packed before shipping 5. Random check after production packed before shipping. 3. Payment terms ,Delivery and Service 鈭歅ayment: All the payment can negotiate, generally by T/T or L/C. 鈭欴elivery: 30% deposit and 70% at sight of documents 鈭歋ervice: 24 hours online service, technical overseas service 4. FAQ Q:How can I get a sample? A:For quality & material checking, stock samples without customized are free with freight collect. Q:What's your sample time? A:Usually 7-10 working days Q:Can the sample cost be refunded or deducted from the payment? A:Yes,it can be refunded when the order QTY reach our moq. Q:What's your OEM service? A:OEM material,logo,color,packing is welcome. Q:What is your lead time? A:Production begins on receipt of your proof approval. Production times vary based on the bag you choose, availability of inventory, the printing process you choose. Production times vary from as little as 1-3 days to up to 2 months. Q:What are your payment terms? A:T/T 30% prepaid, 70% balance against BL. Or LC at sight.Led Votive Candles factory website:http://www.ntyataicandle.com/led-tea-lights/led-votive-candles/

Дата Публикации: 07-09-20

Mask

Описание: 1. Introduction Disposable civilian mask is the most widely used face mask in the world now, it prevents the bacteria from outside world, also helps catch the bacteria shed in liquid droplets and aerosols from the wearer's mouth and nose. It鈥檚 usually made up of three or four layers,often with two filters that filter the objects in certain size both inside and outside. 2. Principle SARS-CoV-2 can be passed through droplets released from an infected carrier鈥檚 mouth. These droplets are larger initially and then form a fine mist. Breathing in smaller droplets is harder to prevent than inhaling larger ones, through covering the nose and mouth. Disposable civilian mask can play a vital role in preventing these larger droplets from spreading from the carrier. This prevents the infection being passed on. 3. Mask samples civilian mask 4. Packing and delivery You don鈥檛 have to worry about packaging,we will strictly follow your packaging requirements.Whether you are preparing fifty packs of masks or ten packs of masks, we will do it.About delivery time, it is based on your order volume,usually within 30-60 days.Look forward to your inquiry. 5. Payment terms,Delivery and Service 鈭?/strong>Payment: All the payment can negotiate, generally by T/T or L/C. 鈭?/strong>Delivery: 4-5 days after receiving purchase order, then we ship the products from our factory to your delivery port. 鈭?/strong>Service: 24 hours online service, 47 languages overseas service. Mask website:http://www.ntxintong.com/mask/

Дата Публикации: 07-09-20

400 Lb Monofilament Fishing Line

Описание: Our History Date of establishment: 11/04/2003 Registered capital: 楼 2272.5 million Group employees: 415 Group vision: Focus on polymer monofilament yarn Create a world-class polymer monofilament brand Our Factory Nantong NTEC Monofilament Technology Co., LTD is a national high-tech enterprise focusing on research and development, production and sales of polymer monofilament. The company covers an area of 65000 square meters, with construction area of 72000 square meters and 117 advanced large diameter functional polymer drawing production lines, ranking first in production scale and market share in this field. NTEC has two large fields of business including monofilament yarn and polymer line and wires. For Polymer line and wires, NTEC focuses on research and development of sports leisure and modern agriculture with grass trimmer line, fishing line, polyester wire (belt), tennis string, badminton string, etc. The product quality is reliable and the variety is complete. For grass trimmer line, NTEC has become a professional supporting supplier of world-famous garden machinery manufacturing enterprise, and provides OEM services for large supermarkets and professional garden tool stores in Europe and America. For PE braided fishing line, due to unique HT coating technology, it has the same quality as famous brands such as Japan and the United States which has been exported to the United States, Germany and Southeast Asia. In order to effectively understand the needs of consumers, NTEC has established a number of online direct stores, and achieved cooperation with the city's sea fishing clubs so as to know the needs of customers, to conduct market research, and to create brand trademarks such as fleck, First-water, sboss, etc. Our Product Nylon monofilament fishing line, pe braided fishing line, trimmer line, polyester wire, polyester strapping, nylon sewing thread, tennis strings, badminton strings Product Application Fishing, trimmer, greenhouse, farming, packaging, sports Our Certificate ISO9001, SGS reports, GRS Production Equipment 500 pcs High speed cord knitting machine, 120 pcs drawing machine, 10 pcs coating machine Production Market Main Market: Germany, England, Netherlands, America, Mexico, Malaysia, Russia, India, Pakistan, Thailand Our Service 20 professional foreign trade team; Professional production team; Professional quality control team 400 Lb Monofilament Fishing Line website:http://www.ntecline.com/ website2:http://www.ntecline.net/

Дата Публикации: 07-09-20

Dusting Jet Filter manufacturers

Описание:  Jiangsu New-Tech Development Co., Ltd. (NTD) is a leading supplier of bulk material handling system, which specialized in research, development and production of machines and parts for material sorting, weighing, mixing, conveying, storage and so on. NTD is located in Yangtze Green Industry Park, Zhangjiagang city, Jiangsu province with 30,000 M2 land occupation area and new modern & large-scale workshops, is very near to Shanghai city. NTD long-term provides OEM services for world-class industry leaders, always adhere to the concept of "Innovation is our life, pursuing sustainable development" and especially focus on R & D and innovation. NTD's products are famous of "high degree of standardization, high quality and reliable performance", there are three categories: automatic weighing, mixing and feeding system, Plastic extrusion equipment, rubber and plastic recycling machinery. The typical products of bulking material handling system are: auto opener, feeding station, filter, series of mixer, tubular chain drag conveying system. Pneumatic conveying system, screw conveyor, automatic weighing system and many kinds of valve. NTD's technology and equipment are widely used in the worldwide leaders in the industries of plastic, rubber, pharmaceutical, food and chemical, and greatly improved their processing level. NTD's experiences on the characteristics of the various materials which used in modern manufacturing processes and treatment process can help you resolve the various problems encountered in the transportation, storage, weighing, mixing, and screening process and so on. While meets the market demand, NTD also continue to strengthen its competitiveness. By providing services for customers in more than 70 countries and regions. NTD has already stood on the forefront of the industry. With the accumulation of years of technical experience, research and development, manufacturing processes, and mold technology. NTD is able to meet the various needs of customers. In addition, NTD's highly creative learn of engineers, advanced technology, and a reliable supply of spare parts, all of these provide reliable protection for maintenance and after-sales service of the products. Jiangsu New-Tech Development Co., Ltd. (NTD) sincerely hope to establish friendly and cooperative relations with you in the near future, and work together for a better future.Dusting Jet Filter manufacturers website:http://www.ntdpvcmixer.com/

Дата Публикации: 07-09-20

Wholesale PP Straw Fabric Beach Travel Hand bag

Описание: Our History Nantong Besen Ind. & Trading CO.,Ltd. Established in 2010,a specialized manufacturer and exporter of different bags for several chain super markets/ famous cosmetics brand all over the world. Our Factory Nantong Besen Ind. & Trading CO.,Ltd. has more than 150 special equipment for all kinds of advanced bags sewing machines.Annual sales of more than 1200,000 bags, the output value of nearly USD 4million . 1. Better design and R & D capability Accumulated more than 5 years of luggage custom production experience, timely capture of popular fashion elements in the market, constantly experiment with the combination of new technology materials and applications. The senior designer with exquisite version room development craft, will you want one by one present. 2. Stronger plant capacity Own factory ,2000 square meters of production plant and more than 200 production staff, 50% is more than 10 years of production experience of the old staff, rich production experience and advanced production equipment combined, trained our high speed and exquisite shipping speed. 3. Stricter product quality control Strict implementation of product materials, semi-finished products, finished product quality inspection, inspection regulations, production, quality control department double check, strive to achieve defective products not off the line, quality problems do not leave the factory principle. 4. More reasonable than quality price Carry out the concept of high quality and low price, long-term cooperation suppliers for us to provide quality and cheap fabrics and various accessories, real low cost and high quality, for you to save every penny! Our Product 1. Cosmetic Bag 2. Message Bag 3. Backpack bag 4. Toiletry hanging Bag 5. Weekend bag 6. Shopping bag 7. Tote bag 8. Men鈥檚 Toiletry Bag Product Application 1. Promotion Gifts 2. Retail 3.Beauty packaging Our Certificate BSCI Production Equipment sewing machine, computer pattern machine, cutting machine, glue machine, high frequency machine, rivet machine, etc. Production Market Every year,we export about 400000pcs bags to Australia,300000pcs to America,500000pcs to 5different countries in Europe... All our customers now list us as the first supplier Our service 1. Your ideas+our creativity =fancy products we have our own designer team,we can develop real products as your idea 2. Quality is our culture. Strict implementation of product materials, semi-finished products, finished product quality inspection, inspection regulations,provide you high quality products 3.Great after-sales service is our mission If the products have the quality problem,we'll take all responsibilityWholesale PP Straw Fabric Beach Travel Hand bag website:http://www.ntbesen.com/

Дата Публикации: 07-09-20

Customized Non Woven Cylinder Printing Machine

Описание: Founded in 2006, our company started from plastic bag making machine and stepped in the field of non-woven bag making in 2008 as the founder, Mr. Chan realized the situation that global white pollution has been continuously serious. Depend on high quality and satisfying after-sales service, our company successfully went global. At the moment, we have sold the products to over 50 countries and established several dozen local service points in the world. In 2015, we innovated a range of paper bag making machines in response to clients鈥?demand, including food bag making machine, shopping bag making machine and so on. Benefit from the global implementation of environmental protection policy, the paper bag making machine has been sold well, and sales grows 20% year on year. Stick by market orientation, we will continuously innovate customized equipment, and provide differentiated solution in order to maximize clients' value appeal. In the future, we are going to constantly focus on the innovation and promotion of eco-friendly packages, establish more and more oversea retail shops and service points, in order to serve the client all over the world as soon and accurate as possible and make a very positive contribution to global environmental protection cause. Welcome to join us and contribute to environmental protection cause together. Our Company's Philosophy: Create business value for clients! Help staff realize personal value! Achieve company's social value!Customized Non Woven Cylinder Printing Machine website:http://www.nova-mech.com/ website2:http://www.wznova.net/

Дата Публикации: 07-09-20

High Pressure Laminate Made in China

Описание: CEM-1 Insulation Board Flame Resistance is a composite epoxy material consisting of a cellulose paper core sandwiched between glass fiber layers, with epoxy resin. This special structure improves the material鈥檚 tensile strength. Its electrical properties are almost on the FR-4 level. CEM-1 offers easy punching, excellent mechanical and electrical properties, and higher flexural strength than paper-based grades. CEM-1 is mainly used in the printed circuit board industry, but can be used for any application that requires higher performance than a phenolic paper-based product. Specifications: * Product Name: CEM-1 Insulation Board Flame Resistance * Available Size: 1020*1220, 1020*2040, 1220*2040,1220*2440 or customized. * Thickness: 0.1mm~200mm. * MOQ: 500kgs. * Color: White. Applications: CEM-1 Insulation Board Flame Resistance is wildly used in bed-of-nails testers, jigs for the electronics industry. Our Product Advantages: * good mechanical properties * low water absorption * fire rating of UL 94 V-0 * none of the hazardous substances specified in the RoHS directive FAQ 1. Q: Are you a factory? A: Yes, we are the manufacturer with export license under 1000tons production capacity. 2. Q: How about the delivery time? A: Standard lead time will be 7-15days, and depends on order quantity too. 3. Q: What information should I let you know if I want to get a quotation? A: size of the products (Length x Width x Height) -quantity -Ex-Work price is our usual price term, if you need CIF price, please let us know your port of destination. Normally small size can be provided for free and customers just need to absorb the express charges.High Pressure Laminate Made in China website:http://www.nova-insulation.com/insulation-materials-composites-materials/high-pressure-laminate/

Дата Публикации: 07-09-20