nitasng
- Создано: 19-11-20
- Последний вход: 19-11-20
Описание: Classification of medical masks: According to performance characteristics and scope of application, medical masks can be divided into: medical protective masks, medical surgical masks, ordinary medical masks. 1. Medical protective mask Medical protective masks are suitable for the protection of airborne respiratory tract infectious diseases by medical staff and related staff. It is a close-fitting self-priming filter medical protection article with a high protection level, especially suitable for contact with airborne transmission during diagnostic activities Or worn by patients with respiratory infections transmitted by droplets at close range. It can filter the particles in the air, block droplets, blood, body fluids, secretion droplets, etc. It is a disposable product. Medical protective masks can prevent most pathogens such as bacteria and viruses. WHO recommends medical personnel to use protective masks against particles to prevent viral infections in hospital air. Medical protective masks comply with GB19083-2003 "Technical Requirements for Medical Protective Masks". Important technical indicators include non-oily particle filtration efficiency and airflow resistance. The specific indicators are as follows: 1) Filtration efficiency: Under the condition of air flow (85 卤 2) L / min, the filtration efficiency of aerodynamic median diameter (0.24 卤 0.06) 渭m sodium chloride aerosol is not less than 95%, which is in accordance with N95 ( Or FFP2) and above. It can block infectious agents with a diameter of less than 5 渭m transmitted by air or close contact with infectious agents transmitted by droplets. 2) Inhalation resistance: under the above flow conditions, the inhalation resistance does not exceed 343.2Pa (35mmH2O). 3) For the samples sprayed on the mask under the pressure of 10.9Kpa (80mmHg), no technical indicators such as penetration should appear on the inside of the mask. 4) The nose mask must be equipped with a nose clip, which is made of bendable plastic material and has a length> 8.5cm. 5) Synthetic blood is sprayed towards the mask sample at a pressure of 10.7kPa (80mmHg), there should be no penetration inside the mask. 2. Medical surgical mask Medical surgical masks are suitable for the basic protection of medical staff or related personnel, as well as the protection against the spread of blood, body fluids and splashes during the invasive operation. The protection level is medium and has certain respiratory protection performance. It is mainly used in clean environments with a cleanliness level of less than 100,000, operating in the operating room, nursing patients with low immune function and performing body cavity puncture and other operations. Medical surgical masks can block most bacteria and some viruses, can prevent medical staff from being infected, and can also prevent the microorganisms carried by medical staff's breath from being directly discharged, posing a threat to patients undergoing surgery. Medical surgical masks require the filtration efficiency of bacteria to be above 95%. Disposable medical surgical masks should also be issued to suspicious respiratory patients to prevent the threat of infection to other hospital personnel and reduce the risk of cross-infection, but to avoid infections that are not as effective as medical protective masks. It complies with YY0469-2004 "Technical Requirements for Medical Surgical Masks", and important technical indicators include filtration efficiency, bacterial filtration efficiency and respiratory resistance. The specific indicators are as follows: 1) Filtration efficiency: Under the condition of air flow (30 卤 2) L / min, the filtration efficiency of aerodynamic median diameter (0.24 卤 0.06) 渭m sodium chloride aerosol is not less than 30%. 2) Bacterial filtration efficiency: under specified conditions, the filtration efficiency of Staphylococcus aureus aerosol with an average particle diameter of (3 卤 0.3) 渭m is not less than 95%; the bacterial filtration rate should be 鈮?5%; the The filtration rate should be 鈮?0%. 3) Breathing resistance: Under the condition of filtration efficiency flow, the inhalation resistance does not exceed 49Pa, and the exhalation resistance does not exceed 29.4Pa. When the pressure difference 鈻?P of gas exchange on both sides of the mask is 49Pa / cm, the gas flow rate should be 鈮?264mm / s. 4) Nose clips and mask straps: Nose clips should be provided on the mask. The nose clips are made of plastic materials and the length of the nose clip should be greater than 8.0cm. The mask band should be easy to wear and take, and the breaking strength at the connection point between each mask band and the mask body should be greater than 10N. 5) Synthetic blood penetration: After 2ml of synthetic blood is sprayed at the pressure of 16.0kPa (120mmHg) towards the outer side of the mask, no penetration should occur on the inner side of the mask. 6) Flame retardant performance: The mask material should be made of non-flammable materials, and the mask burns less than 5s after leaving the flame. 7) Residual amount of ethylene oxide: For masks sterilized by ethylene oxide, the residual amount of ethylene oxide should be less than 10渭g / g. 8) Skin irritation: The primary irritation index of the mask material should be 鈮?.4, and there should be no sensitization reaction. 9) Microbial indicators: total bacterial colonies 鈮?0CFU / g, and no coliform bacteria, Pseudomonas aeruginosa, Staphylococcus aureus, hemolytic streptococci and fungi shall be detected. 3. Ordinary medical mask Ordinary medical masks are used to block spouts exhaled from the oral cavity and nasal cavity, and can be used for one-time hygiene care in ordinary medical environments with the lowest protection level. It is suitable for general hygiene care activities, such as sanitary cleaning, liquid distribution, cleaning bed units, etc., or the blocking or protection of particles other than pathogenic microorganisms such as pollen. Conforms to the relevant registered product standard (YZB), generally lacks the filtration efficiency requirements for particles and bacteria, or the filtration efficiency requirements for particles and bacteria are lower than medical surgical masks and medical protective masks, only reaching 20.0% for 0.3渭m diameter aerosols -25.0% protection effect, can not reach the filtration efficiency of particles and bacteria, can not effectively prevent pathogens from invading through the respiratory tract, can not be used for clinical invasive operations, nor can it protect particles and bacteria and viruses, only limited to dust particles Or aerosol plays a certain mechanical barrier. Instructions 1. Carefully cover the mouth and nose with a mask and fasten it to minimize the gap between the face and the mask; 2. Avoid touching the mask when using it-after touching the used mask, for example to remove or clean the mask, wash your hands with soap and water or use alcohol hand sanitizer; 3. After the mask is wet or contaminated with moisture, replace with a new clean and dry mask; 4. Do not reuse disposable masks. Disposable masks should be discarded after each use.Anti Coronavirus suppliers website:http://www.neptunusmedical.com/anti-coronavirus/
Дата Публикации: 19-11-20
Описание: Our History In 2014, three like-minded young people came to Wenzhou with the same dreams and goals, opened up a territory on this hot land known as the "Chinese shoe capital", entered the footwear industry, and established WENZHOU NEWALK INTERNATIONAL TRADE CO., LTD. For the past six years, the company has been adhering to the supremacy of customers, focusing on meeting all customer needs, focusing on the development of the middle-aged and elderly markets. And has established a long-term close cooperative relationship with a number of factories, the cooperative factories from south to north, Wenzhou, Taizhou, Hangzhou, Luoyang, Qingdao and so on. At present, the company has 16 employees, all of which are young people born in the post-85s and post-90s period. Under the authority of the Board of Directors锛學ith excellent service, excellent professional ability, Proficient in foreign languages, absolutely familiar with footwear technology锛孧ake the company from scratch, develop step by step until now, and made small achievements in the international footwear market锛?/p> In 2019, the first branch company in Qingdao-QINGDAO NEWALKPLUS INTERNATIONAL TRADE CO., LTD. was established to provide our customers with more products to choose from! Our Factory Cooperation with multiple factories锛歅U/PVC injection shoes factories 銆丅usiness shoe factories 銆丼neaker factories 銆丆asual shoe factories and many more. Our Product Sports shoes, work shoes, elderly shoes, boots, Business shoes, children's shoes, etc. Product Application Shoes of all ages. Production Market Mainly for the Japanese market锛孉nnual sales reach 2 million pairs锛?/p>Insole website:http://www.newalkshoes.com/ website2:http://www.newalkshoes.net/
Дата Публикации: 19-11-20
Описание: Product Information Product nameSodium Sulfide Red flakes 60% Other NamesSodium sulfide nonahydrate锛汼odium Sulphide CAS No1313-84-4 Molecular FormulaH2Na2OS AppearanceRed Flake Strength100% MOQ27 MT PaymentTT/LC/DP Packing25kg woven bags/50kg woven bags/ Jumbo bags Details Melting point: 50 掳 C Boiling point: 920 掳 C Density: 1.427 Storage condition: 2-8 掳 C Form: solid Specific gravity: 1.427 Water solubility: 180g / L (25 掳 C) Packing Application Sodium Sulfide Red flakes 60%, its chemical property anhydrous is white crystal, easy to deliquescence. Industrial products are usually pink, brownish red and yellowish brown due to impurities. It is soluble in water (15.4g/100ml water at 10 鈩?and 57chemicalbook.2g/100ml water at 90 鈩?. It is slightly soluble in alcohol and insoluble in ether. The aqueous solution is strongly alkaline. Soluble in sulfur to form sodium polysulfide. It can be used to make dyes, sulfides, ore flotation agent, leather unhairing agent, paper cooking agent, etcBasic Chemicals Free Sample website:http://www.newcolourdyes.com/basic-chemicals/
Дата Публикации: 19-11-20
Описание: Our History Development 1998 鈥?Mr. Shi Jihong and his brother and sister founded the Newcomer group. Newcomer Group first factory established. 2001 鈥?Newcomer Group forward-looking finish "NEWCOM" brand domestic registration, began to expand their own brand business. 2002 鈥?Newcomer Group's Youku "NEWCOM" brand in the United States and Europe and the United States to register. 2003 鈥?Newcomer Group first in the country to establish luggage physical and chemical experimental real, to ensure that the quality control luggage, standardized, and meet environmental requirements. 2004 鈥?Newcomer Group through IS09001 international quality management system certification. 2005 鈥?Newcomer Group in Jiangsu Lianyungang to establish a new industrial base, the manufacturing capacity of the strategic layout. 2006 鈥?Newcomer Group through IS014000 international environmental management system certification. 鈥?Newcomer Group undertook and completed the major scientific research project in Zhejiang Province "Supply chain management system under dynamic user constraints and its application in the luggage industry" 鈥?Newcomer Group participates in the writing of "China Bags & Trade Development Report" organized by the Ministry of Commerce. 2007 鈥?Newcomer Group, the first to establish the national single largest single-style luggage logistics center to meet the multi-brand luggage at home and abroad action; 鈥?Newcomer Group's guest brand won the "brand-name products in China" title. 鈥?Newcomer Group participated in the development of the "Handbook of Quality and Practice of Export Bags and Bills" organized by China Light Industry Crafts Import and Export Chamber of Commerce. 2008 鈥?Newcomer group's guest brand to 2008 for four consecutive years was selected as "Boao Asia Forum only designated luggage gift" ralph lauren pas cher, 鈥?Newcomer group through OHSASI8001 occupational health and safety management system certification. 鈥?Newcomer Group R & D center was named "Zhejiang provincial small and medium enterprises common technical service center & rdquo ;. 2009 鈥?Newcomer Group exclusive access to the US high-end brand Hobbie HOBIE & rdquo; in the global scope of the right to operate luggage, and with well-known foreign design company, the development of Hobbit & Hdb; HOBIE & rdquo; products. 鈥?Newcomer Group sales revenue of 850 million yuan. 2010 鈥?Newcomer Group participated in the environmental protection products organized by the "Environmental labeling products technical requirements - luggage" standard development work 鈥?Newcomer Group selected "Shanghai World Expo franchisee & rdquo ;. 鈥?Newcomer Group acquired the national famous hardcore brand every day luggage, open up domestic and international hard box market. 鈥?Newcomer Group's AROUND & ldquo; face "rumquo; series of products to complete the former patch can replace the revolutionary innovation, and domestic and foreign patents, in the Canton Fair received a high degree of recognition of domestic and foreign merchants. 2011 鈥?Newcomer Group and "China Import and Export Fair (Canton Fair) reached a senior partner & rdquo; relationship. 鈥?Newcomer Group National single largest bag of multi-brand integrated shop "leisure guest line" in Jiaxing Mewan Street grand opening, the new industry business model detonated the domestic luggage market. 鈥?Newcomer Group developed the world's first boarding suitcase trolley case and patented. Our Factory Newcomer Gruop was established in 2008. We are a luggage and bags factory ,with about 3000 workers.We have ISO9001 quality management system certification, ISO14001 environmental management system certification, and BSCI social responsibility certification as well as some other certifications that our customers have required. It is a professional foreign trade export-oriented enterprise, which provide one stop service integrating with products R&D, manufacture, sales and logistics. We have perfect quality control standard, professional manufacturing process and efficient customization service capability. Our Product We have several brands, Newcom, Airline. Product Application Newcom is for business and smart luggage. Our Certificate We have the BSCI Audit Summary Report certificate; TUV certificate锛?SEDEX Members Ethical Trade Audit(SMETA) Report; IQNet Certificate锛歋GS certificate锛沍hejiang Manufacturing Certificate锛汷ccupational health and safety management system certification and so on. Group has won the "China Famous Brand", "China's luggage industry brand", "China's top ten leather industry enterprises", "Shanghai World Expo franchisee" honor, at the same time China Import and Export Fair (Canton Fair) The only senior partner, the Group's main brand "You off NEWCOM" luggage for seven no years as the Boao Forum for Asia gift. while Newcomer Group won the US high-end water sports brand & quot; Hobbie HOBIE & quot; in the global luggage franchise. Production Equipment We have a smart conference recording system; CAD input & output System; Interactive smart terminal; Material sample sealing system; Material professional tender; smart shelf; smart tray; smart forklift; smart rail transport; RFID tag & etc. Automatic cutting machine; computerized sewing machine; smart transmission system of raw material; smart interactive product output & quality monitor terminal; decoupling sortation etc. Production Market Main market Newcomer Group brand exported to the United States, the Middle East, Southeast Asia, Russia, more than 30 countries And the area. Enterprise Honor Rookie luggage was elected as the executive director unit of China Leather Association. Rookie luggage was elected as the vice-chairman unit of the luggage branch of the China Chamber of Commerce for Import and Export of Light Industry Crafts. Xinxiu Luggage was elected as the member unit of China Leather Industry Standard Committee Luggage Sub-Technical Committee. Rookie luggage was elected as the vice-chairman unit of the Zhejiang Leather Association. Rookie Luggage was elected as the director unit of the Luggage Committee of the Zhejiang Leather Association. Rookie luggage was elected as the star enterprise of Pinghu City. Rookie Luggage was elected as the president unit of the Pinghu Luggage Industry Association. Rookie luggage was selected as one of the top ten enterprises in China's leather industry. Rookie luggage won the "Zhejiang Quality Award". Rookie bags won the title of "China Famous Brand". Rookie luggage was elected as "China's leading luggage brand". Rookie Luggage won the title of "National Luggage Industry Customer Satisfaction AAA Enterprise" in the national customer satisfaction evaluation. Rookie bags in 2006 won the title of "Advanced Unit of Social Responsibility" in Pinghu City. In 2007, Rookie Bags successively donated more than 1 million yuan of funds to the Municipal Charity Federation as a special fund for aid and poverty alleviation to carry out poverty alleviation work. In 2007, the rookie luggage was awarded the "Pinghu Charity Award" by the Pinghu Charity Federation. In 2007, Rookie Luggage was rated as an advanced enterprise for poverty alleviation in Pinghu City. In 2008, after the Wenchuan earthquake in Sichuan, Rookie Bags donated 300,000 yuan in cash to the Pinghu Charity Federation to support the Sichuan earthquake relief and organized a large number of employees within the company to raise funds to support the Sichuan disaster area. In 2008, 2009 and 2010, it has become the only designated luggage gift by the Boao Economic Forum in Asia for three consecutive years. In 2010, it won the title of Licensed Manufacturer at the Shanghai World Expo. Our Service Before Sales We are a luggage factory, founded in 1998, with about 3000 workers. I can show you our business license. Under "Scope of Business, "you can see the words "manufacture and sale of luggage and accessories"; if we are only a trading company, you won't find the word" manufacture."Besides, you can also check our factory's certification. We have ISO9001 quality management system certification, ISO14001 environmental management system certification, and BSCI social responsibility certification as well as some other certifications that our customers have required. We have been producing travel luggage and bags for over 22 years. Our consistent attitude towards creating the highest quality travel luggage and bags for the travel industries has helped us in building a strong base in the domestic as well as global markets. Therefore, we have as long as we know, the business model is quite comprehensive conception. We provide more dynamic and adjustable business models according to market needs. Therefore, our company is working on all these types of business categories for our customers. Especially, our company has well experienced different teams working for OEM, ODM, and OBM business models, respectively. Besides these models, our company designed B2B and B2C business systems for e-commerce, and each team is working on its high capacity. For instance: Amazon for the B2C, Alibaba international platform for the B2B, etc. 1. We always treasure our customers first. 2. We cherish investing in the value of our customer/consumer demand. 3. We have 22 years of professional experience with a high-quality supply chain system, excellent "Q.A." (quality assurance) system, and intelligent assembly line for the Travel goods industry. 4. We have a comprehensive, complete logistics system and chemical testing center in the industry. 5. We have a very flexible and advanced production information system for small quantities and more batches. 6. We have Cambodia overseas production base, export to the United States, duty-free. From our linktree, https://linktr.ee/newcomluggage, you can get all needed social media pages and online shops direction, as well as the showroom you can see now online, could find our products. If necessary, we can send you our catalog in which also list out a wide range of products. If there is any product you are interested in, just send us a purchasing contract by email after you confirmed the quotation. During COVID-19, we suggest you visit the link: xxxxxxxxxx to see the video of our factory. You're warmly welcome to visit our factory, which is located in Xindai Town, Pinghu City Zhejiang province. It's close to Shanghai. Only 1.2 hour's drive from Shanghai Pudong Airport, or 1 hour's drive from Shanghai Hongqiao Airport. You can also arrive at our factory on a high-speed train. Our factory is only 15 minutes' drive from JINSHANBEI train station. On Sales We provide different types of business models to our customers, such as OBM, ODM and OEM businesses, and the B2B, B2C e-commerce model. We produce all types of bags, including hard-side luggage, soft side- luggage, backpacks, children's models, family models, travel accessories, and health epidemic prevention kits. Because we are a manufacturer in the travel goods industry for more than 20 years, so we have various categories of production lines and upstream supply chain centers. Usually, our MOQ is 1x40'FCL, with one item in two colors for new production. If less than this MOQ, it will bring us two problems: raw materials purchase and production low-efficiency. That's the reason for us to set MOQ. If you have difficulty to reach MOQ, we suggest you consider our NEWCOM brand ready-made goods. Could you explain the details? Ok, NEWCOM is our own brand, every year our factory produce some products with NEWCOM brand for customers. You can select different items, different colors from these goods to reach 1x20'FCL for fast shipment. That means if you buy our NEWCOM brand ready-made goods, MOQ can be 1x20'FCL with various items, different colors. I think it's an excellent way to test your market, which items will be more sellable. It will help you to consider better about the future business direction. Usually, it takes 60-75 days. And actual delivery is subject to the production plan when the order placement made. The below breakdown shows the different delivery periods for the different business models. 1.For the ODM soft-side luggage 45-60 days; hard-side luggage 30-45 days, 2.For the OBM luggage 15-45 days; (first order 45-90 days) 3.For the OEM 45-90 days; (first order 45-90 days) We can cooperate with you according to our different payment methods. You need to give a deposit for the first time order. If there is a second-order for the OBM, you can get exemption of deposit. For the ODM first deposit requires an additional 30%, we will support your wire transfer, letter of credit, and payment. ( T/T, L/C, D/P ) Payment terms: 30% is wire transfer deposit, 70% is wire transfer for 30, 60, 90 days payment. The remaining amount is given in the accounting period ranging from 30 to 90 days according to the credit limit. We are one of the leading manufacturers and exporters of OBM, OEM, ODM of premium quality, travel luggage, and Bags in China. Our professional designers are taking care of the R&D, product concepts, testing, and manufacturing for the ODM business. We have our specific sample room (showroom) and test room, for OEM business, we can make the sample quickly and test the sample before making mass production. It can save a lot of developing time and ensure product quality. For the OBM business, we take stock and can accept small MOQ, and this is much easy if you want to start the luggage business. After Sales We have many different types of customers, such as brand customers, department store customers, supermarket customers, discount store customers, and small retailers, etc. We can produce different price level products. For the quality, every stage right from the designing, production, and finishing to the final dispatch executed by a team of well-trained professionals of experience behind them. We have our specific quality management system to be carried out strictly from incoming raw materials to the final shipment. Also, we have our test center to test the functions of the goods under every order to ensure quality. We have three years guarantee. Effective upon receipt of the product. In the warranty period, it will be free for you to repair or return if it is non-human damage. lease give your spare parts quantity in your office order; we will arrange together with bulk goods. the spare parts are 1% of the order.we can supply about 0.5% free for some parts. You can show the problem details with the pictures to us, we will check. and we can send some free spare parts to you according to the actual situation锛乀he product was wrapped by a P.E. bag, then put inside the carton(corrugated box). We sent the packaging of relevant ASINs to 3rd party B.V. for FFP test. They have been enrolled and approved for FFP certification.we can send you a test report if you need it. An FC label was affixed on the front side, according to Amazon's requirement. The F.C. label includes detailed information for a product, such as its brand, description, size, color, ASIN barcode, UPC code, country of origin, and there are seven languages, they are English, French, German, Italian, Spanish, Dutch and Japanese.except these, there are recycling logos and lot number. The mark is G.W.: *LBS *KGS N.W.: *LBS *KGS MEASURE: *CM(L) 脳*CM(W)脳CM(H) *CBF *CBM MADE IN CHINA PBGO REF#: ASIN: QTY: PC/CTN We have the test room in our factory and control the quality from developing the sample. Our factory always tests the first creat a sample, if any quality problem, we suggest the client change the construction or change the material. After doing the mass production, the factory takes one example from mass production; they will test it. All of our products are under strict inspection before delivery. We have Wheel Running Test: 4.5km/h锛?0km, Trolley Extension Test: 5000 times锛孴umble Test: 2R/Minute,50Rolls, Trolley Handle test: main 500times; side 300times, Zipper performance test, and conditional temperature test, etc.if you have the test standard, we will follow your request, if no, we will do it base on our standard. we can do, but it must be in the third party test company, and we can not bear the test cost.Smart Carry On Scale Hard Luggage Made in China website:http://www.newcombag.com/ website2:http://www.newcombags.com/
Дата Публикации: 19-11-20
Описание: Machine Specifications 1Packing Speed30-60 bags/min 2Filling range5-12 g/bag 3Inner bag size90mm(W)*75mm(L) Or 100mm(W)*85mm(L) 4Outer bag size100mm(W)*125mm(L) Or 110mm(W)*135mm(L) 5Air pressure0.65mpa 6Gas consumption0.5m鲁/min (suggest use 30L gas pump) 7Total power1-Phrase 220V/50Hz/3.7Kw 8Weight650Kg 9Dimension1050(L)x750(W)x2100(H)mm Application Drip coffee bag completely retains the traditional brewing method of drip coffee, and meets the demand of pursuing a cup of high-quality coffee in the limited time of daily life. A cup of mellow coffee can be made through a few simple steps. Once invented, this kind of drip coffee bag is hot sold immediately. Now a fully automatic drip coffee bag packing machine can be fully realized automatically filling, packaging all functions, but also to maximize the retention of the original flavor of coffee. Machine Features (hardware) C60E is specialized for coffee and tea packing. It can achieve inner bag and outer bag one time made automatically by integral and compact structure. Inner bag is drip coffee bag. Outer bag is three sides sealing bag. Ultrasonic sealing is used for inner bag, firm sealing. To compared with traditional hot sealing or cold sealing, there is no product residue at the sealing area by high frequency vibration, so the sealed seams are strong, and ensure tight package. Another benefit of ultrasonic sealing is avoiding the negative effect of heating sealing to products. As ultrasonic sealing doesn鈥檛 need temperature, it has no influence for the taste of products. In addition, ultrasonic sealing seam is very narrow, almost one straight line. It can save packaging film cost, every bag can save at least 15mm length film. We achieve 60bags per minute under C60E , by ultrasonic sealing, as there is no film sticking to the sealing jaws, it can help to reduce equipment downtime and maximize continuous packaging. For inner bag film, we suggest to use permeable film, such as ,PET mesh, nylon mesh, corn fibre mesh, nonwoven fabric, or filter paper. Usually nonwoven fabric is common used. All the film can effectively improve the taste and quality of products. This machine can be combined with elevator, and feeding system can be switched between volumetric cup feeding and screw feeding according different ground coffee. Machine Features (software) Compared with our powerful hardware and structure, NEWIDEA has done enough work in software design and improvement. We have developed our own packaging program, and improved the program according to the feedback of customers, so that our packaging program is more reasonable. The packaging machine is an integrated equipment with multiple actions of feeding, sealing, cutting and temperature control. The mature program can ensure that the cooperation of each action is more perfect and stable. The collection and transmission of packaging data can also be realized in our software. At the same time, we can provide operation interfaces in English, Russian, Spanish, Portuguese and other different languages. The operation interface is simple and not complicated, which can make every operator quickly familiar with each operation interface and each button. Simple operation Does the packaging machine need operators to pay attention to it all the time in daily operation? The answer is no. The following features of our packing machine can make the operator's work easier. 1. No material. The machine will prompt the alarm 2. No film, The machine will prompt the alarm. Our frame film structure can be replaced with new roll film very simply. 3. No ribbon, The machine will prompt the alarm. 4. Changing different bag former, After our training, a skilled operator can complete the replacement of the bag former and related adjusting work within 15-30 minutes. 5. Weight accuracy, packaging machine can combine with weight detector to ensure the weight of each bag is within the error range allowed by the customer Fully automated, intelligent packaging machines allow you to achieve greater output with fewer workers. After sales - warranty 1) One year guarantee time, lifelong free service,24 hours online service, reply within 12 hours. 2) Spare parts provide in factory price within 20 years. 3) 10 years manufacture experience, Strong R&D department for design kinds of customized packing machines, and support engineers available to service machinery overseas for installation debugging and teaching. 4) Over 10 years experienced technicians provide you best service. 5) We promise machine keep working years in good working condition. Fewer easy broken parts, easy to change. 6) OEM,ODM and customized service 7) Operation video, manual book tool box for machine, one set of easy wear parts is provided. 8) We also supply tool box, manual book, operation video, and teach you about how to use and maintain machine if you like free of cost by our engineer. 9) All of our goods have passed CE certificate FAQ 1. Are you manufactory or trading company? We are manufactory, already have been over 11 years old. We have our own brand 鈥淣EWIDEA鈥?, Over 400 customers chose us, More than 600 solutions are supplied per year. 2. The delivery time of this machine ? Usually we keep stock machine in our manufactory, to ensure we can delivery our machine with 10-20 days, If the machine is out of stock for the time being, the time to build a new one is about 30 days. 3. Can you delivery to customer鈥檚 warehouse? Transportation service is an important service project for us. We have cooperative and stable freight forwarders in the main ports of destination in the world, so that we can meet the door-to-door service needs of customers. If you need this kind of service, please contact our sales engineer, who will give you a reliable and reasonable quotation. 4. Payment terms T/T, L/C, west union, wechat pay, alibaba trade insurance all is scceptable. 5. To order this packaging machine, necessary information as follows: Material picture Preferred bag shape Bag size Target bag weight Local voltage and frequency Packaging - Transportation How to ensure the safety of the machine during transportation锛?/p> We use export standard wooden cases to ensure that the packaging is in good condition. The machine is reinforced in the wooden case, and all accessories and additional vulnerable parts are well packed to prevent damage during loading and unloading.Coffee Packaging Machine website:http://www.newideapacker.com/coffee-packaging-machine/
Дата Публикации: 19-11-20
Описание: 1.Introduction This machine can fully chopped and stirred kinds of materials to achieve emulsification, and chopped, stirred, and emulsified in one operation. It can not only increase the fine density of the product, increase its elasticity, but also improve the product yield. The main effect is to improve product quality and make the product taste better. 2.Advantages (1) All the contact to food parts are made of high-quality 304 stainless steel, and the frame is welded with high-quality stainless steel channel steel, which is more durable and can greatly extend the service life. (2) The chopping knife is made of imported materials and processed by a special process. The chopping pan is made of 304 stainless steel precision casting and has an anti-overflow pot edge to prevent seepage and overflow. (3) The chopping pot is double-speed, which can be matched with any speed of the chopping knife, the chopping time is short, and the temperature rise of the material is small. (4) Electrical parts adopt waterproof design, good sealing and easy cleaning 3.Technical Parameters ModelZB-125 Capacity90 kg/time Chopping blade speed1800/4000 r/m Chopping blade quantity6 pcs Chopping pot speed9/13 r/m Power21.48KW Machine weight1800kg Overall dimension1430*2135*1635mm 4.Precautions: (1)Do not close the body to the turntable, in order to prevent injury. (2)When open the cut pot cover angle is greater than 30 degrees, the knife shaft and chopping pot motor will automatically stop, but the knife shaft is still rotation for a while due to inertia, so open the cover should pay special attention not to touch the knife shaft, wait for the knife shaft all stopped then begin the opening of the cover work. The hand or hard object cannot reach to one side of the shaft of the knife when the material is discharged. (3)Do not bring bones, hard objects into the chopping pot, so as not to cause injury. (4)Chopping knife installation must be scrubbed clean, fastened. After the tool is worn by 15mm, it must be stopped to prevent knife breaks from injuring people. 5, the variable frequency type after the completion of work, must turn off the external power supply, otherwise, the inverter cooling fan non-stop works, burn the cooling fan motor. 6, cleaning equipment must be cut off power.China Meat Bowl Cutter Machine website:http://www.newinms.com/meat-processing-machine/meat-bowl-cutter-machine/
Дата Публикации: 19-11-20
Описание: FeaturesAluminum alloy material cartridge tattoo grip Size avaiable:28MM Easy to operate, very convenient Suitable for professional use or home use Professional grade for regular using Each grip is individually blister packed in it鈥檚 own factory packaging ColorGolden, blue, purpleWholesale Tattoo Cartridge Grips website:http://www.newviewtattoosupply.com/tattoo-grips/tattoo-cartridge-grips/
Дата Публикации: 19-11-20
Описание: Our factory Our Service Our Packing & Shipping Our CertificateWholesale Industrial Grade Calcium Nitrate website:http://www.nitratechem.com/
Дата Публикации: 19-11-20
Описание: About锛欰ustralian Standard Kitchen Cabinet The material of melamine to make kitchen cabinets, will not only more affinity, but also create a shining effect! Combine the rough fine lines of melamine decoration with concrete wall, it may make you feel like in the nature, and also create a natural and comfortable kitchen atmosphere. Compare with lacquer door panels, in the wood grain environment, even food and kitchen utensils are placed at casual, it will not appear disorderly. N&L products are matching with the necessary hardware and other accessories. All the colors, styles, shapes, size, materials can be customized among your budget. FAQ Q1. How is your Quality Control? A 1. -Before the order to be confirmed, we would check the material and color of leather/ fabric by sample which should be strictly the same as mass production. -We will be tracing the different phase of production from the beginning. -Every product quality checked before packing. -Before delivery clients could send one QC or point the third party to check the quality. We will try our best to help clients when problem occurred. Q2. How is your After Sales Service? A 2. -Shipment and sample quality tracking includes lifetime. -Any small problem happening in our furniture will be solved at the most prompt time. -We always offer relative technical support. Quick response, all your inquire will be replied within 24 hours.Wholesale Australian Style Kitchen Cabinet website:http://www.nl-kitchencabinets.com/kitchen-cabinet/australian-style-kitchen-cabinet/
Дата Публикации: 19-11-20
Database (default) | 0.129198 s | |||
---|---|---|---|---|
22.6406 kB | ||||
Исходный пункт | Min | Max | Average | Всего |
SELECT `group_name`, `config_key`, `config_value` FROM `oc2_config` ORDER BY `group_name` ASC, `config_key` ASC (1) |
0.008503 s
|
0.008503 s
|
0.008503 s
|
0.008503 s
|
0.8359 kB
|
0.8359 kB
|
0.8359 kB
|
0.8359 kB
|
|
SELECT `oc2_`.`id_crontab` AS `id_crontab`, `oc2_`.`name` AS `name`, `oc2_`.`period` AS `period`, `oc2_`.`callback` AS `callback`, `oc2_`.`params` AS `params`, `oc2_`.`description` AS `description`, `oc2_`.`date_created` AS `date_created`, `oc2_`.`date_started` AS `date_started`, `oc2_`.`date_finished` AS `date_finished`, `oc2_`.`date_next` AS `date_next`, `oc2_`.`times_executed` AS `times_executed`, `oc2_`.`output` AS `output`, `oc2_`.`running` AS `running`, `oc2_`.`active` AS `active` FROM `oc2_crontab` AS `oc2_` WHERE `active` = 1 AND (`date_next` <= '2024-12-05 05:05:11' OR `date_next` IS NULL) (1) |
0.010707 s
|
0.010707 s
|
0.010707 s
|
0.010707 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SELECT `oc2_category`.`id_category` AS `id_category`, `oc2_category`.`name` AS `name`, `oc2_category`.`order` AS `order`, `oc2_category`.`created` AS `created`, `oc2_category`.`id_category_parent` AS `id_category_parent`, `oc2_category`.`parent_deep` AS `parent_deep`, `oc2_category`.`seoname` AS `seoname`, `oc2_category`.`description` AS `description`, `oc2_category`.`price` AS `price`, `oc2_category`.`last_modified` AS `last_modified`, `oc2_category`.`has_image` AS `has_image` FROM `oc2_categories` AS `oc2_category` WHERE `seoname` IS NULL LIMIT 1 (1) |
0.000440 s
|
0.000440 s
|
0.000440 s
|
0.000440 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SHOW FULL COLUMNS FROM `oc2_ads` (1) |
0.020665 s
|
0.020665 s
|
0.020665 s
|
0.020665 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SELECT `oc2_location`.`id_location` AS `id_location`, `oc2_location`.`name` AS `name`, `oc2_location`.`order` AS `order`, `oc2_location`.`id_location_parent` AS `id_location_parent`, `oc2_location`.`parent_deep` AS `parent_deep`, `oc2_location`.`seoname` AS `seoname`, `oc2_location`.`description` AS `description`, `oc2_location`.`last_modified` AS `last_modified`, `oc2_location`.`has_image` AS `has_image`, `oc2_location`.`latitude` AS `latitude`, `oc2_location`.`longitude` AS `longitude`, `oc2_location`.`id_geoname` AS `id_geoname`, `oc2_location`.`fcodename_geoname` AS `fcodename_geoname` FROM `oc2_locations` AS `oc2_location` WHERE `seoname` IS NULL LIMIT 1 (1) |
0.011503 s
|
0.011503 s
|
0.011503 s
|
0.011503 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SHOW FULL COLUMNS FROM `oc2_users` (1) |
0.001653 s
|
0.001653 s
|
0.001653 s
|
0.001653 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SELECT `oc2_user`.`id_user` AS `id_user`, `oc2_user`.`name` AS `name`, `oc2_user`.`seoname` AS `seoname`, `oc2_user`.`email` AS `email`, `oc2_user`.`password` AS `password`, `oc2_user`.`description` AS `description`, `oc2_user`.`status` AS `status`, `oc2_user`.`id_role` AS `id_role`, `oc2_user`.`id_location` AS `id_location`, `oc2_user`.`created` AS `created`, `oc2_user`.`last_modified` AS `last_modified`, `oc2_user`.`logins` AS `logins`, `oc2_user`.`last_login` AS `last_login`, `oc2_user`.`last_ip` AS `last_ip`, `oc2_user`.`user_agent` AS `user_agent`, `oc2_user`.`token` AS `token`, `oc2_user`.`token_created` AS `token_created`, `oc2_user`.`token_expires` AS `token_expires`, `oc2_user`.`api_token` AS `api_token`, `oc2_user`.`hybridauth_provider_name` AS `hybridauth_provider_name`, `oc2_user`.`hybridauth_provider_uid` AS `hybridauth_provider_uid`, `oc2_user`.`subscriber` AS `subscriber`, `oc2_user`.`rate` AS `rate`, `oc2_user`.`has_image` AS `has_image`, `oc2_user`.`failed_attempts` AS `failed_attempts`, `oc2_user`.`last_failed` AS `last_failed`, `oc2_user`.`notification_date` AS `notification_date`, `oc2_user`.`device_id` AS `device_id`, `oc2_user`.`stripe_user_id` AS `stripe_user_id`, `oc2_user`.`google_authenticator` AS `google_authenticator` FROM `oc2_users` AS `oc2_user` WHERE `seoname` = 'nitasng' AND `status` = 1 LIMIT 1 (2) |
0.000741 s
|
0.009232 s
|
0.004987 s
|
0.009973 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
1.4063 kB
|
|
SELECT COUNT(`oc2_ad`.`id_ad`) AS `records_found` FROM `oc2_ads` AS `oc2_ad` WHERE `id_user` = '188' AND `status` = 1 ORDER BY `created` DESC (1) |
0.000634 s
|
0.000634 s
|
0.000634 s
|
0.000634 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SELECT `oc2_ad`.`id_ad` AS `id_ad`, `oc2_ad`.`id_user` AS `id_user`, `oc2_ad`.`id_category` AS `id_category`, `oc2_ad`.`id_location` AS `id_location`, `oc2_ad`.`title` AS `title`, `oc2_ad`.`seotitle` AS `seotitle`, `oc2_ad`.`description` AS `description`, `oc2_ad`.`address` AS `address`, `oc2_ad`.`latitude` AS `latitude`, `oc2_ad`.`longitude` AS `longitude`, `oc2_ad`.`price` AS `price`, `oc2_ad`.`phone` AS `phone`, `oc2_ad`.`website` AS `website`, `oc2_ad`.`ip_address` AS `ip_address`, `oc2_ad`.`created` AS `created`, `oc2_ad`.`published` AS `published`, `oc2_ad`.`featured` AS `featured`, `oc2_ad`.`last_modified` AS `last_modified`, `oc2_ad`.`status` AS `status`, `oc2_ad`.`has_images` AS `has_images`, `oc2_ad`.`stock` AS `stock`, `oc2_ad`.`rate` AS `rate`, `oc2_ad`.`favorited` AS `favorited`, `oc2_ad`.`cf_doppole` AS `cf_doppole` FROM `oc2_ads` AS `oc2_ad` WHERE `id_user` = '188' AND `status` = 1 ORDER BY `created` DESC LIMIT 10 OFFSET 0 (1) |
0.000772 s
|
0.000772 s
|
0.000772 s
|
0.000772 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SELECT `oc2_c`.`id_category`, COUNT("a.id_ad") AS `count` FROM `oc2_categories` AS `oc2_c` JOIN `oc2_ads` AS `oc2_a` USING (`id_category`) WHERE `oc2_a`.`id_category` = oc2_c.id_category AND IF(0 <> 0, DATE_ADD( published, INTERVAL 0 DAY), DATE_ADD( NOW(), INTERVAL 1 DAY)) > '2024-12-05 05:05:12' AND `oc2_a`.`status` = 1 GROUP BY `oc2_c`.`id_category` ORDER BY `oc2_c`.`order` ASC (1) |
0.035062 s
|
0.035062 s
|
0.035062 s
|
0.035062 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SELECT `oc2_category`.`id_category` AS `id_category`, `oc2_category`.`name` AS `name`, `oc2_category`.`order` AS `order`, `oc2_category`.`created` AS `created`, `oc2_category`.`id_category_parent` AS `id_category_parent`, `oc2_category`.`parent_deep` AS `parent_deep`, `oc2_category`.`seoname` AS `seoname`, `oc2_category`.`description` AS `description`, `oc2_category`.`price` AS `price`, `oc2_category`.`last_modified` AS `last_modified`, `oc2_category`.`has_image` AS `has_image` FROM `oc2_categories` AS `oc2_category` WHERE `oc2_category`.`id_category` = '2' LIMIT 1 (10) |
0.000309 s
|
0.014195 s
|
0.002547 s
|
0.025472 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
7.0313 kB
|
|
SELECT `oc2_category`.`id_category` AS `id_category`, `oc2_category`.`name` AS `name`, `oc2_category`.`order` AS `order`, `oc2_category`.`created` AS `created`, `oc2_category`.`id_category_parent` AS `id_category_parent`, `oc2_category`.`parent_deep` AS `parent_deep`, `oc2_category`.`seoname` AS `seoname`, `oc2_category`.`description` AS `description`, `oc2_category`.`price` AS `price`, `oc2_category`.`last_modified` AS `last_modified`, `oc2_category`.`has_image` AS `has_image` FROM `oc2_categories` AS `oc2_category` WHERE `id_category` != 1 AND `parent_deep` IN (0, 1) ORDER BY `order` ASC (1) |
0.000416 s
|
0.000416 s
|
0.000416 s
|
0.000416 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SELECT `oc2_category`.`id_category` AS `id_category`, `oc2_category`.`name` AS `name`, `oc2_category`.`order` AS `order`, `oc2_category`.`created` AS `created`, `oc2_category`.`id_category_parent` AS `id_category_parent`, `oc2_category`.`parent_deep` AS `parent_deep`, `oc2_category`.`seoname` AS `seoname`, `oc2_category`.`description` AS `description`, `oc2_category`.`price` AS `price`, `oc2_category`.`last_modified` AS `last_modified`, `oc2_category`.`has_image` AS `has_image` FROM `oc2_categories` AS `oc2_category` WHERE `id_category_parent` = '2' AND `id_category` != '2' LIMIT 1 (1) |
0.000320 s
|
0.000320 s
|
0.000320 s
|
0.000320 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SELECT `oc2_location`.`id_location` AS `id_location`, `oc2_location`.`name` AS `name`, `oc2_location`.`order` AS `order`, `oc2_location`.`id_location_parent` AS `id_location_parent`, `oc2_location`.`parent_deep` AS `parent_deep`, `oc2_location`.`seoname` AS `seoname`, `oc2_location`.`description` AS `description`, `oc2_location`.`last_modified` AS `last_modified`, `oc2_location`.`has_image` AS `has_image`, `oc2_location`.`latitude` AS `latitude`, `oc2_location`.`longitude` AS `longitude`, `oc2_location`.`id_geoname` AS `id_geoname`, `oc2_location`.`fcodename_geoname` AS `fcodename_geoname` FROM `oc2_locations` AS `oc2_location` WHERE `oc2_location`.`id_location` = '0' LIMIT 1 (9) |
0.000296 s
|
0.000468 s
|
0.000342 s
|
0.003078 s
|
0.7031 kB
|
0.7109 kB
|
0.7040 kB
|
6.3359 kB
|
Kohana | 0.054890 s | |||
---|---|---|---|---|
138.9141 kB | ||||
Исходный пункт | Min | Max | Average | Всего |
find_file (211) |
0.000012 s
|
0.038607 s
|
0.000260 s
|
0.054890 s
|
0.4453 kB
|
2.7969 kB
|
0.6584 kB
|
138.9141 kB
|
Requests | 1.507936 s | |||
---|---|---|---|---|
1,578.6406 kB | ||||
Исходный пункт | Min | Max | Average | Всего |
"user/nitasng" (1) |
1.510018 s
|
1.510018 s
|
1.510018 s
|
1.510018 s
|
1,589.7969 kB
|
1,589.7969 kB
|
1,589.7969 kB
|
1,589.7969 kB
|
Запуск приложения (1) | 3.005688 s | 3.005688 s | 3.005688 s | 3.005688 s |
---|---|---|---|---|
3,426.4063 kB | 3,426.4063 kB | 3,426.4063 kB | 3,426.4063 kB |
DOCROOT/index.php |
APPPATH/bootstrap.php |
APPPATH/kohana/system/classes/Kohana/Core.php |
APPPATH/common/classes/kohana.php |
APPPATH/classes/kohana/exception.php |
APPPATH/kohana/system/classes/Kohana/Kohana/Exception.php |
APPPATH/kohana/system/classes/Log.php |
APPPATH/kohana/system/classes/Kohana/Log.php |
APPPATH/kohana/system/classes/Config.php |
APPPATH/kohana/system/classes/Kohana/Config.php |
APPPATH/kohana/system/classes/Log/File.php |
APPPATH/kohana/system/classes/Kohana/Log/File.php |
APPPATH/kohana/system/classes/Log/Writer.php |
APPPATH/kohana/system/classes/Kohana/Log/Writer.php |
APPPATH/kohana/system/classes/Config/File.php |
APPPATH/kohana/system/classes/Kohana/Config/File.php |
APPPATH/kohana/system/classes/Kohana/Config/File/Reader.php |
APPPATH/kohana/system/classes/Kohana/Config/Reader.php |
APPPATH/kohana/system/classes/Kohana/Config/Source.php |
APPPATH/common/modules/widgets/init.php |
APPPATH/common/modules/widgets/classes/widgets.php |
APPPATH/common/modules/imagefly/init.php |
APPPATH/kohana/system/classes/Route.php |
APPPATH/kohana/system/classes/Kohana/Route.php |
APPPATH/classes/core.php |
APPPATH/common/classes/oc/core.php |
APPPATH/kohana/system/classes/Cookie.php |
APPPATH/kohana/system/classes/Kohana/Cookie.php |
APPPATH/common/classes/arr.php |
APPPATH/kohana/system/classes/Kohana/Arr.php |
APPPATH/kohana/modules/cache/config/cache.php |
APPPATH/config/cache.php |
APPPATH/kohana/system/classes/Config/Group.php |
APPPATH/kohana/system/classes/Kohana/Config/Group.php |
APPPATH/common/classes/cache.php |
APPPATH/kohana/modules/cache/classes/Kohana/Cache.php |
APPPATH/common/classes/configdb.php |
APPPATH/kohana/modules/database/classes/Config/Database.php |
APPPATH/kohana/modules/database/classes/Kohana/Config/Database.php |
APPPATH/kohana/modules/database/classes/Config/Database/Writer.php |
APPPATH/kohana/modules/database/classes/Kohana/Config/Database/Writer.php |
APPPATH/kohana/modules/database/classes/Config/Database/Reader.php |
APPPATH/kohana/modules/database/classes/Kohana/Config/Database/Reader.php |
APPPATH/kohana/system/classes/Kohana/Config/Writer.php |
APPPATH/kohana/modules/database/classes/DB.php |
APPPATH/kohana/modules/database/classes/Kohana/DB.php |
APPPATH/kohana/modules/database/classes/Database/Query/Builder/Select.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/Query/Builder/Select.php |
APPPATH/kohana/modules/database/classes/Database/Query/Builder/Where.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/Query/Builder/Where.php |
APPPATH/kohana/modules/database/classes/Database/Query/Builder.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/Query/Builder.php |
APPPATH/classes/database/query.php |
APPPATH/common/classes/oc/database/query.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/Query.php |
APPPATH/kohana/modules/database/classes/Database.php |
APPPATH/kohana/modules/database/classes/Kohana/Database.php |
APPPATH/kohana/modules/database/config/database.php |
APPPATH/config/database.php |
APPPATH/classes/database/mysqli.php |
APPPATH/common/classes/oc/database/mysqli.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/MySQLi.php |
APPPATH/kohana/system/classes/Profiler.php |
APPPATH/kohana/system/classes/Kohana/Profiler.php |
APPPATH/classes/database/mysqli/result.php |
APPPATH/common/classes/oc/database/mysqli/result.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/MySQLi/Result.php |
APPPATH/kohana/modules/database/classes/Database/Result.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/Result.php |
APPPATH/kohana/modules/auth/config/auth.php |
APPPATH/kohana/system/classes/Session.php |
APPPATH/kohana/system/classes/Kohana/Session.php |
APPPATH/config/auth.php |
APPPATH/common/classes/i18n.php |
APPPATH/common/classes/oc/i18n.php |
APPPATH/kohana/system/classes/Kohana/I18n.php |
APPPATH/config/routes.php |
APPPATH/common/classes/url.php |
APPPATH/kohana/system/classes/Kohana/URL.php |
APPPATH/common/classes/theme.php |
APPPATH/common/classes/oc/theme.php |
APPPATH/common/classes/request.php |
APPPATH/kohana/system/classes/Kohana/Request.php |
APPPATH/kohana/system/classes/HTTP/Request.php |
APPPATH/kohana/system/classes/Kohana/HTTP/Request.php |
APPPATH/kohana/system/classes/HTTP/Message.php |
APPPATH/kohana/system/classes/Kohana/HTTP/Message.php |
DOCROOT/themes/default/init.php |
DOCROOT/themes/default/options.php |
APPPATH/kohana/modules/auth/classes/Auth.php |
APPPATH/kohana/modules/auth/classes/Kohana/Auth.php |
APPPATH/common/classes/auth/oc.php |
APPPATH/kohana/system/config/session.php |
APPPATH/kohana/modules/database/config/session.php |
APPPATH/kohana/system/classes/Session/Native.php |
APPPATH/kohana/system/classes/Kohana/Session/Native.php |
APPPATH/kohana/system/classes/Encrypt.php |
APPPATH/kohana/system/classes/Kohana/Encrypt.php |
APPPATH/classes/form.php |
APPPATH/common/classes/oc/form.php |
APPPATH/kohana/system/classes/Kohana/Form.php |
APPPATH/common/classes/alert.php |
APPPATH/common/modules/cron/classes/cron.php |
APPPATH/common/modules/cron/classes/kohana/cron.php |
APPPATH/classes/orm.php |
APPPATH/common/classes/oc/orm.php |
APPPATH/kohana/modules/orm/classes/Kohana/ORM.php |
APPPATH/kohana/system/classes/Model.php |
APPPATH/kohana/system/classes/Kohana/Model.php |
APPPATH/kohana/system/classes/Inflector.php |
APPPATH/kohana/system/classes/Kohana/Inflector.php |
APPPATH/kohana/system/config/inflector.php |
APPPATH/common/classes/date.php |
APPPATH/kohana/system/classes/Kohana/Date.php |
APPPATH/kohana/system/classes/HTTP.php |
APPPATH/kohana/system/classes/Kohana/HTTP.php |
APPPATH/kohana/system/classes/HTTP/Header.php |
APPPATH/kohana/system/classes/Kohana/HTTP/Header.php |
APPPATH/kohana/system/classes/Request/Client/Internal.php |
APPPATH/kohana/system/classes/Kohana/Request/Client/Internal.php |
APPPATH/kohana/system/classes/Request/Client.php |
APPPATH/kohana/system/classes/Kohana/Request/Client.php |
APPPATH/kohana/system/classes/Response.php |
APPPATH/kohana/system/classes/Kohana/Response.php |
APPPATH/kohana/system/classes/HTTP/Response.php |
APPPATH/kohana/system/classes/Kohana/HTTP/Response.php |
APPPATH/classes/controller/user.php |
APPPATH/classes/controller.php |
APPPATH/kohana/system/classes/Kohana/Controller.php |
APPPATH/classes/model/category.php |
APPPATH/classes/model/location.php |
APPPATH/classes/model/ad.php |
APPPATH/classes/model/coupon.php |
APPPATH/common/classes/model/oc/coupon.php |
APPPATH/classes/view.php |
APPPATH/common/classes/oc/view.php |
APPPATH/kohana/system/classes/Kohana/View.php |
APPPATH/common/modules/breadcrumbs/classes/breadcrumbs.php |
APPPATH/common/modules/breadcrumbs/classes/breadcrumb.php |
APPPATH/classes/model/user.php |
APPPATH/common/classes/model/oc/user.php |
APPPATH/kohana/modules/database/classes/Database/Expression.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/Expression.php |
APPPATH/common/classes/pagination.php |
APPPATH/common/modules/pagination/classes/kohana/pagination.php |
APPPATH/common/modules/pagination/config/pagination.php |
APPPATH/common/classes/seo.php |
DOCROOT/themes/default/views/main.php |
DOCROOT/themes/default/views/header_metas.php |
APPPATH/common/classes/html.php |
APPPATH/common/classes/oc/html.php |
APPPATH/kohana/system/classes/Kohana/HTML.php |
APPPATH/common/classes/model/forum.php |
APPPATH/common/classes/valid.php |
APPPATH/kohana/system/classes/Kohana/Valid.php |
APPPATH/common/views/analytics.php |
APPPATH/common/views/alert_terms.php |
DOCROOT/themes/default/views/header.php |
APPPATH/kohana/modules/database/classes/Database/Query/Builder/Join.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/Query/Builder/Join.php |
APPPATH/common/classes/menu.php |
APPPATH/common/views/nav_link.php |
DOCROOT/themes/default/views/widget_login.php |
APPPATH/common/views/pages/auth/login-form.php |
APPPATH/common/classes/csrf.php |
APPPATH/classes/text.php |
APPPATH/common/classes/oc/text.php |
APPPATH/kohana/system/classes/Kohana/Text.php |
APPPATH/common/views/pages/auth/social.php |
APPPATH/common/views/pages/auth/forgot-form.php |
APPPATH/common/views/pages/auth/register-form.php |
APPPATH/common/classes/captcha.php |
APPPATH/common/classes/oc/captcha.php |
APPPATH/common/views/breadcrumbs.php |
DOCROOT/themes/default/views/pages/user/profile.php |
APPPATH/kohana/modules/image/config/image.php |
APPPATH/common/views/sidebar.php |
APPPATH/common/modules/widgets/classes/widget.php |
APPPATH/common/modules/widgets/classes/widget/share.php |
APPPATH/common/modules/widgets/classes/widget/rss.php |
APPPATH/common/classes/feed.php |
APPPATH/kohana/system/classes/Kohana/Feed.php |
APPPATH/common/modules/widgets/views/widget/widget_share.php |
APPPATH/common/views/share.php |
APPPATH/common/modules/widgets/views/widget/widget_rss.php |
DOCROOT/themes/default/views/footer.php |
APPPATH/common/views/profiler.php |
APPPATH/kohana/system/views/profiler/style.css |
Core |
date |
ereg |
libxml |
openssl |
pcre |
sqlite3 |
zlib |
bz2 |
calendar |
ctype |
curl |
hash |
filter |
ftp |
gettext |
gmp |
SPL |
iconv |
pcntl |
readline |
Reflection |
session |
standard |
shmop |
SimpleXML |
mbstring |
tokenizer |
xml |
cgi-fcgi |
bcmath |
dom |
fileinfo |
gd |
intl |
json |
ldap |
exif |
mcrypt |
mysql |
mysqli |
PDO |
pdo_mysql |
pdo_sqlite |
Phar |
posix |
pspell |
soap |
sockets |
sysvmsg |
sysvsem |
sysvshm |
tidy |
wddx |
XCache |
xmlreader |
xmlwriter |
xsl |
zip |
mhash |
XCache Optimizer |
XCache Cacher |
XCache Coverager |
Zend OPcache |
auth_redirect |
string(42) "http://board.flexi-soft.in.ua/user/nitasng" |
csrf-token-login |
string(23) "YmtGc7ZoicfApFEoalDBlH9" |
csrf-token-forgot |
string(26) "MyvYl7RTtQSdDtOfA57UiqLqJA" |
csrf-token-register |
string(26) "ZlF9l1VbfkJQKvvvOgAW6H1aXZ" |
alert_data |
array(0) |
SERVER_SIGNATURE |
string(0) "" |
UNIQUE_ID |
string(27) "Z1EYZt7FHChkgvo7r4r1JAAAACo" |
HTTP_USER_AGENT |
string(40) "CCBot/2.0 (https://commoncrawl.org/faq/)" |
HTTP_HOST |
string(22) "board.flexi-soft.in.ua" |
SERVER_PORT |
string(2) "80" |
PHPRC |
string(35) "/var/www/19218-saniyaw/data/php-bin" |
REDIRECT_HANDLER |
string(24) "application/x-httpd-php5" |
PHP_INI_SCAN_DIR |
string(53) "/var/www/19218-saniyaw/data/php-bin/flexi-soft.in.ua:" |
DOCUMENT_ROOT |
string(48) "/var/www/19218-saniyaw/data/www/flexi-soft.in.ua" |
SCRIPT_FILENAME |
string(64) "/var/www/19218-saniyaw/data/www/board.flexi-soft.in.ua/index.php" |
REQUEST_URI |
string(13) "/user/nitasng" |
SCRIPT_NAME |
string(10) "/index.php" |
HTTP_CONNECTION |
string(5) "close" |
REMOTE_PORT |
string(5) "44086" |
PATH |
string(28) "/usr/local/bin:/usr/bin:/bin" |
CONTEXT_PREFIX |
string(9) "/php-bin/" |
SERVER_ADMIN |
string(24) "a.shlyk@flexi-soft.in.ua" |
PWD |
string(47) "/var/www/php-bin/19218-saniyaw/flexi-soft.in.ua" |
REQUEST_SCHEME |
string(4) "http" |
REDIRECT_STATUS |
string(3) "200" |
HTTP_IF_MODIFIED_SINCE |
string(29) "Sat, 07 Sep 2024 23:20:17 GMT" |
HTTP_ACCEPT_LANGUAGE |
string(14) "en-US,en;q=0.5" |
HTTP_ACCEPT |
string(63) "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8" |
REMOTE_ADDR |
string(11) "18.97.14.80" |
SERVER_NAME |
string(22) "board.flexi-soft.in.ua" |
SHLVL |
string(1) "1" |
SERVER_SOFTWARE |
string(72) "Apache/2.4.6 (CloudLinux) OpenSSL/1.0.2k-fips mod_fcgid/2.3.9 PHP/5.4.16" |
QUERY_STRING |
string(0) "" |
SERVER_ADDR |
string(9) "127.0.0.1" |
HTTP_X_FORWARDED_PORT |
string(2) "80" |
GATEWAY_INTERFACE |
string(7) "CGI/1.1" |
SERVER_PROTOCOL |
string(8) "HTTP/1.0" |
HTTP_ACCEPT_ENCODING |
string(7) "br,gzip" |
REDIRECT_URL |
string(10) "/index.php" |
REQUEST_METHOD |
string(3) "GET" |
CONTEXT_DOCUMENT_ROOT |
string(48) "/var/www/php-bin/19218-saniyaw/flexi-soft.in.ua/" |
HTTP_X_FORWARDED_PROTO |
string(4) "http" |
_ |
string(16) "/usr/bin/php-cgi" |
ORIG_SCRIPT_FILENAME |
string(51) "/var/www/php-bin/19218-saniyaw/flexi-soft.in.ua/php" |
ORIG_PATH_INFO |
string(10) "/index.php" |
ORIG_PATH_TRANSLATED |
string(64) "/var/www/19218-saniyaw/data/www/board.flexi-soft.in.ua/index.php" |
ORIG_SCRIPT_NAME |
string(12) "/php-bin/php" |
PHP_SELF |
string(10) "/index.php" |
REQUEST_TIME_FLOAT |
float 1733367910,6708 |
REQUEST_TIME |
integer 1733367910 |