tfhj299
- Создано: 10-01-22
- Последний вход: 10-01-22
Описание: tslanhaimedical.com Disposable gloves are an essential item in any healthcare environment. They not only protect healthcare providers and patients from exposure to potentially dangerous microbes, they also help set a precedent of hygiene and care across the industry. While this shouldn't come as a surprise, what you might not have realized is that disposable gloves aren't all created equal. Different materials and design choices make certain products better suited for different medical environments. And if you order the wrong type of glove for your practice, you may end up wasting resources and increasing the risk of punctures, rips, and tears. Disposable gloves are generally made from one of three materials: nitrile, latex, or vinyl. In this blog, we'll explore what makes these gloves different from each other, as well as offer guidance into which environments each type is best suited for. Latex gloves For decades, latex has been the rockstar of the medical disposable glove world. This is because, as noted by Darwin Brown in Physician Assistant, latex gloves were recommended protection in the 1980s and 1990s against bloodborne pathogens like HIV. But as their popularity increased, so did cases of allergic reactions. This led to more demand for latex-free disposable glove alternatives, like nitrile and vinyl. For those who aren't allergic, latex gloves are comfortable, relatively cost-effective, and offer a high degree of touch sensitivity. With high levels of flexibility, protection, and comfort, disposable latex gloves are suitable for most medical environments - as long as latex allergies are not an issue. Vinyl gloves Vinyl gloves are made from PVC, a petroleum-based film. The primary benefit of vinyl disposable gloves is that they're inexpensive to manufacture. That being said, they are less durable than latex and nitrile, and they offer limited protection against chemical or biomedical exposure. When vinyl gloves are stretched or flexed, the individual molecules separate and the integrity of the protective barrier is compromised. Vinyl gloves have also raised a red flag in terms of their environmental impact, as noted by Health & Safety International. Due to their low cost and low protection levels, vinyl gloves are commonly used in non-hazardous and low-infection environments. Nitrile gloves Nitrile gloves came to prominence in the 1990s as a leading latex alternative. While they're not as elastic or flexible as their latex counterparts, disposable nitrile gloves are notably more durable and resistant to chemicals. As such, these gloves are the ideal choice for anyone who has to handle potentially hazardous and corrosive chemicals. They are also perfectly suited for most medical environments, being exceptionally puncture-resistant and eliminating the risk of latex allergy reactions. Understanding these key differences will help you make the right decision when selecting new exam gloves for your organization's unique medical environment. And except these gloves, considering the price and the performance, Synthetic Nitrile Gloves are also pretty popular.
Дата Публикации: 10-01-22
Описание: nbyxpc.com A valve is a device or natural object that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. The word is derived from the Latin valva, the moving part of a door, in turn from volvere, to turn, roll. The simplest, and very ancient, valve is simply a freely hinged flap which swings down to obstruct fluid (gas or liquid) flow in one direction, but is pushed up by the flow itself when the flow is moving in the opposite direction. This is called a check valve, as it prevents or "checks" the flow in one direction. Modern control valves may regulate pressure or flow downstream and operate on sophisticated automation systems. Valves have many uses, including controlling water for irrigation, industrial uses for controlling processes, residential uses such as on/off and pressure control to dish and clothes washers and taps in the home. Even aerosol spray cans have a tiny valve built in. Valves are also used in the military and transport sectors. In HVAC ductwork and other near-atmospheric air flows, valves are instead called dampers. In compressed air systems, however, valves are used with the most common type being ball valves. There are many valve designs, types and models, with a wide range of industrial applications, such as Solenoid Valve, Pneumatic Pulse Valve, Explosion Proof Solenoid Valve, Namur Solenoid, Solenoid Valve Parts, Pneumatic Valve, Fluid Solenoid Valve, etc. All satisfy one or more of the functions identified above. Valves are expensive items, and it is important that a correct valve is specified for the function, and must be constructed of the correct material for the process liquid. Regardless of type, all valves have the following basic parts.. the body, bonnet, trim (internal elements), actuator, and packing. The basic parts of a valve are illustrated in the image on the right. Valve Body The valve body, sometimes called the shell, is the primary boundary of a pressure valve. He serves as the main element of a valve assembly because it is the framework that holds all the parts together. The body, the first pressure boundary of a valve, resists fluid pressure loads from connecting piping. It receives inlet and outlet piping through threaded, bolted, or welded joints. The valve-body ends are designed to connect the valve to the piping or equipment nozzle by different types of end connections, such as butt or socket welded, threaded or flanged. Valve bodies are cast or forged in a variety of forms and each component have a specific function and constructed in a material suitable for that function. Valve Bonnet The cover for the opening in the body is the bonnet, and it is the second most important boundary of a pressure valve. Like valve bodies, bonnets are in many designs and models available. A bonnet acts as a cover on the valve body, is cast or forged of the same material as the body. It is commonly connected to the body by a threaded, bolted, or welded joint. During manufacture of the valve, the internal components, such as stem, disk etc., are put into the body and then the bonnet is attached to hold all parts together inside. In all cases, the attachment of the bonnet to the body is considered a pressure boundary. This means that the weld joint or bolts that connect the bonnet to the body are pressure-retaining parts. Valve bonnets, although a necessity for most valves, represent a cause for concern. Bonnets can complicate the manufacture of valves, increase valve size, represent a significant cost portion of valve cost, and are a source for potential leakage. Valve Trim The removable and replaceable valve internal parts that come in contact with the flow medium are collectively termed as Valve trim. These parts include valve seat(s), disc, glands, spacers, guides, bushings, and internal springs. The valve body, bonnet, packing, et cetera that also come in contact with the flow medium are not considered valve trim. A Valve's trim performance is determined by the disk and seat interface and the relation of the disk position to the seat. Because of the trim, basic motions and flow control are possible. In rotational motion trim designs, the disk slides closely past the seat to produce a change in flow opening. In linear motion trim designs, the disk lifts perpendicularly away from the seat so that an annular orifice appears. Valve trim parts may be constructed of assorted materials because of the different properties needed to withstand different forces and conditions. Bushings and packing glands do not experience the same forces and conditions as do the valve disc and seat(s). Flow-medium properties, chemical composition, pressure, temperature, flow rate, velocity and viscosity are some of the important considerations in selecting suitable trim materials. Trim materials may or may not be the same material as the valve body or bonnet.
Дата Публикации: 10-01-22
Описание: lysunbio.com Testing for COVID-19 has tremendous value when it comes to trying to contain the spread of the COVID virus. According to Dr. Joseph Bustamante, Chief Medical Officer at Memorial Healthcare, "The variety of SARS-Cov-2 Test(the virus that causes COVID-19) available today can be rather confusing. There are some clear indications as to which test you should get and some not so clear reasons." There are essentially two broad categories of testing. Covid 19 Antigen Rapid Test (frequently referred to as a rapid test). This test detects protein fragments specific to the Coronavirus. It can be done in a clinic, doctor's office, or hospital. Turnaround time for results is usually very quick and in some cases, results can be reported within 15 minutes. The other is PCR testing, which is considered the "gold standard" in SARS-CoV-2 detection. This test actually detects RNA (or genetic material) that is specific to the virus and can detect the virus within days of infection, even those who have no symptoms. The test can be done in a clinic, hospital, or even in your car. Turnaround time is longer, generally in the 2-3 day range but results can be in as little as 24 hours. When demand is high, results can take a week or longer. Rapid tests are considered most accurate in a patient who is having symptoms of COVID-19. While the rapid test can get you results very quickly, the results may not always be accurate. It may meet the situation of false negative or false positive. In those who don't have symptoms, the false negative rate - meaning my test is negative but I actually have the disease — can be as high as 50%. This can have tremendous consequences as we try to contain the spread of COVID-19. The false positive rate - meaning I test positive but I do not really have the disease - is quite low. So, if you test positive from a rapid test it is more likely you do have the disease. Current recommendation is to have a confirmation test performed (the PCR test) if you still have symptoms and have had a negative rapid test. This is especially true if you've had a high-risk exposure. A high risk exposure is considered more than 15 minutes of contact with a COVID-positive individual in a 24-hour period and you have been within 6 feet of this individual. Covid 19 Antibody Rapid Test, also known as serology testing, is usually done after full recovery from COVID-19. Eligibility may vary, depending on the availability of tests. A health care professional takes a blood sample, usually by a finger prick or by drawing blood from a vein in the arm. Then the sample is tested to determine whether you've developed antibodies against the virus. The immune system produces these antibodies — proteins that are critical for fighting and clearing out the virus. The timing and type of antibody test affects accuracy. If you have testing too early in the course of infection, when the immune response is still building up in your body, the test may not detect antibodies. So antibody testing is not recommended until at least 14 days after the onset of symptoms. The U.S. Food and Drug Administration (FDA) authorized specific antibody tests, but tests with questionable accuracy are still on the market. Another benefit of accurate antibody testing is that people who've recovered from COVID-19 may be eligible to donate plasma, a part of their blood. This plasma could be used to treat others with severe disease and boost the ability to fight the virus. Doctors call this convalescent plasma. There are many different kinds of tests are widely used to identify the different diseases, such as Blood Glucose Test, Blood Sugar Test Kit, Uric Acid Test, Hemoglobin Test, Lipid Test, Cholesterol Test Kit, Dry Chemistry Analyzer, etc.
Дата Публикации: 10-01-22
Описание: litaiarmor.com A bulletproof vest, also known as a ballistic vest or a bullet-resistant vest, is an item of body armor that helps absorb the impact and reduce or stop penetration to the torso from firearm-fired projectiles and fragmentation from explosions. The vest may come in a soft form, as worn by many police officers, prison guards, security guards and some private citizens. Prison guards and police may wear soft vests designed to resist stabbing attacks, using metallic or para-aramid components. Soldiers, SWAT teams, marines and special operations forces wear hard armors, either in conjunction with soft armor or alone. This allows for protection against rifle ammunition or fragmentation. Kevlar ballistic vests are designed to offer protection against level II and level IIIa types of ballistic threats. According to NIJ and HOSDB standards, level II ballistic vests must offer protection against 9mm handguns with up to .357 magnums. Level IIIa ballistic vests offer protection against 9mm handguns with up to .44 magnums. However, level IV threats are not protected by the normal Kevlar bulletproof vests. In other words, Kevlar body armors are designed for protection against firearms that are easily found within the general population. Hard ballistic plates are used to offer protection against level IV threats. These plates can stop large, high velocity bullets such as those fired from rifles and submachine guns. The plates can be inserted into the pouches at the back or front of vests so as to increase protection to vital body organs such as the heart.When purchasing a body armor there is no need to spend so much money on hard ballistic plates if you are not going into a war zone. Just buy body armor that can protect you from the threats you are facing. The most popular hard ballistic plate carrier is the Cordura vest. The vest contains SAPI plate pouches at the back and front. The pouches can accommodate a 10 X 12" ballistic plate. Therefore, the bulletproof vest is often equipped with Bulletproof Plate(choosing Level IIIA Bulletproof Plate, Level III Bulletproof Plate, Level III+ Bulletproof Plate or Level IV Bulletproof Plate according to the situation) and Bulletproof Shield(Level IIIA Bulletproof Shield, Level III Bulletproof Shield, Level III+ Bulletproof Shield or Level IV Bulletproof Shield) while using. Ballistic plates are made of hardened ceramic materials or dyneema polyethylene. These materials can withstand the impact of high velocity bullets. The plates are widely used by tactical police teams and in war zones. With hard ballistic plates, soldiers can easily penetrate into the enemy territory without having to worry about being shot. Hard ballistic plates come in different sizes and weights depending on the materials used in the fabrication process. Lighter ballistic plates are usually more expensive due to the advanced technology required to fabricate them. Although expensive, lighter ballistic plates are very efficient and easy to use as they allow the user to move freely. Heavier ballistic plates are cheaper but can restrict movements. This means that they should not be used in war zones because soldiers must be in a position to move quickly when required to do so. It is also advisable not to wear heavy ballistic plates for prolonged periods as they can be very cumbersome. Apart from the materials used to fabricate ballistic plates, their size also determines the total weight. Thee smaller ones weigh less than the larger ones. Light ballistic plates weigh as little as 2.4 kilograms while the heavy ones weigh 6 kilograms. You can also get a composite one that weighs 3.6 kilograms. When choosing the kind of ballistic plate to wear, there are several factors that you have top consider. These include the size of the user and the total duration he/she will be using it. The larger ballistic plates are suitable for bigger, stronger people. On the contrary, small ballistic plates are suitable for smaller people. For smaller people, the light plates will offer the same protection as that offered by the heavy plates to the larger individuals. The composite hard ballistic plates are not too heavy or too light and therefore they can be used by anybody. They are also cheaper since they're made of several materials. So as to effectively use ballistic plates, soldiers and tactical teams must be well trained and familiarize themselves with the plates. If not familiar with the plate, a soldier can find himself in a position where he feels very uncomfortable in the plate. This will hinder his/her performance and can lead to lose of lives as the enemy would be at an advantage.
Дата Публикации: 10-01-22
Описание: kisvip.com It seems that every person between the ages of 8 and 18 knows the story of Harry Potter and the Sorcerer's Stone and Frodo the hobbit and his journey through the Middle Earth in the Lord of the Rings. Gemstones and jewelry have been a part of mankind since before history was written. It began when time began and man first walked on Earth. Of course, the jewelry they wore in the old days was not made like we make it today. The ancient people wore jewelry made of feathers, bones, shells, and colored pebbles. These colored pebbles were gems and gems have been admired for their beauty and durability and made into adornments. Diamonds were not popular until people learned how to cut them to show their brilliance, which began in Europe sometime around the 1300. Many types of jewelry items still made today began as functional objects. Pins and brooches originated from the clasps that held clothing together. Rings and pendants were used for early seals and signs of identification, rank, and authority. The earliest finding of jewelry was dated around 25,000 years ago. This simple necklace made of fish bones was found in a cave in Monaco. What did this necklace signify? Was it for the chief of the village or a witch doctor? Maybe a princess wore it as a trophy her husband gave her for having a boy child. We might never know the real reason for the making of the gift but we can use our imagination and try to understand the way people thought in those days. The need to feel accepted, to belong, can be as important as the needs we fulfill in caring for our bodies. A sense of identity and self-esteem is not a frill, so belonging reflects a need, too. The first adornments were derived from the hunt; teeth, claws, horns, and bones. Hunters believed that wearing trophies would bring them good luck for the next hunt. Remember, the village lived day to day by the virtue of a good hunter and this person deserved respect and privileges. Of course, the best hunter wanted to show they had courage and prowess. In early societies, jewelry was worn as amulets to protect against bad luck and illness. The silver vest of the elfin princess protected Frodo from harm in the stories of his adventure through Middle Earth. Even today, we hear the tales and adventures of people long ago who somehow found luck and fortune because of gemstones and jewelry. From these myths evolves jewelry made into symbols thought to give the wearer control over fertility, wealth and love. Jewelry was worn for its magical properties. Jewelry later came to denote human connection and commitment. Slaves were made to wear bracelets to show who they belonged to. Wedding rings symbolized the commitment two people had for each other. At one time in Europe only the wealthy and high-ranking church officials were allowed to wear gemstones. This was a sign of wealth and power. The commoners wishing to mimic them would wear less expensive jewelry to add color and flash to their festive costumes. Some African tribes today still wear enormous lip plugs and distort the mouth of its wearer. This is to make the men look more fearsome in battle and women so ugly that the other tribes wouldn?t want to steal them. Have you seen the women in Africa with the long necks? This is done by adding a new ring every year from childhood. This deforms the upper body and makes the neck appear longer. In following the trail or evolution of jewelry from the ancient worlds of Africa to the Mediterranean then Europe and finally the United States, we can see how jewelry evolved over time, becoming many different kinds like Zircon Jewelry, Stainless Steel Jewelry and Silver Jewelry and is found in Fashion Jewelry stores today. And with the development of the society, more and more decoration have been widely used in the daily life and the materials used are more diverse, for example, Crystal Jewelry, Pearl Jewelry like Crystal Earring, Crystal Necklace, Pearl Earring and Pearl Necklace are all commonly used in modern fashion decoration.
Дата Публикации: 10-01-22
Описание: jxflatknitmachine.com A knitting machine is a technology used for knitting fabrics. The way it interloops one set of yarn with another with the use of needles is an overwhelming sight. You can just imagine how both easy and difficult it is to form the clothes you wear. People used to knit their clothes with all the effort and hardwork. Knitting machines have changed the way we think about clothing and fabric. Since its invention in 1579, the business of making clothing transferred into small cottage industries, making hand knitting non-essential, a recreational activity. Innovation has quickly transformed the growing capabilities of knitting machines in forming knitted fabrics and today, you can choose from a variety of knitting machines for your textile industry. There are a lot of ways to classify knitting machines. Some sources have classified them according to its configuration such as either Flat Bed or Circular. In other references, it's sorted according to its function, like for example, Flat Knitting Machine, Computerized Sweater Knitting Machine, Collar Knitting Machine and Shoe Knitting Machine. Indeed, there are many different types of knitting machines used for making many types of knitted fabrics. We have listed and classified these knitting machines as either Weft knitting machine or Warp Knitting Machine. Weft Knitting Machine Weft Knitting Machines are used to make weft knitted fabrics by just a single yarn. Knitting in weft is a more common method than warp knitting. In Weft knitting, the looms are knitted horizontally in a circular form from left to right of the fabric. Weft knits are made from a yarn fed into the circular knitting machine needles. Warp Knitting Machine On the other hand, Warp knitting is done by knitting in a zigzag pattern along the fabric area. While weft knitting is done by knitting across the fabric, Warp knitting is accomplished by running knits through adjacent wales or columns. Circular Knitting Machine A Circular Knitting machine is one of the most popular knitting machines in use today. Even hobbyists make use of a small circular knitting machine such as an Addi Express Knitting Machine to create their own knitted pieces such as sweaters, gloves, scarfs and many small diameters sized creations. The mechanism of the industrial Circular Knitting Machines used to create apparels in large volumes and fast production rates is simple. Fabrics are knitted in spiral and cast on. The circle of stitches are joined forming seamless tubes. The layers it produces are counted on as the number of rows. Machines of this type can produce a wide range of diameter from 12 inches to 60 inches. It can knit a variety of sportswear and fashion clothing with the cooperation of Flat Knitting Machine Accessories and Linking Machine apparel in an incredibly fast rate.
Дата Публикации: 10-01-22
Описание: eu-vollsun.com For a vehicle, thera are many indispensible part maybe we don't know, like engine mount. Unless you're familiar with cars, the term "engine mount" might be a bit foreign to you. This mystery part actually plays a vital role in the performance of your car, so if it starts to malfunction, you’ll notice a number of undesirable symptoms in the way your vehicle handles. By arming yourself with information on the engine mounting and signs of issues to look out for, you can protect by yourself and your car from further mishap. An engine mount is exactly what it sounds like – the part of your car that holds the engine in place. Because your transmission and engine are bolted together, you need mounts to keep them from moving around. Usually, there's one mount holding the transmission and two or three holding the engine. To keep things stable, one of the engine mounts goes on the car frame, while the other physically keeps the engine in place so it doesn't vibrate too much. This helps to reduce the vibrations you feel while driving, making your ride much smoother. Typically, engine mounts are made of rubber so that they don't clang against the frame of the car and make distracting sounds. They might also be filled with liquid to help reduce vibrations even more. Some even utilize vacuum-controlled capabilities to automatically dampen vibrations and sound depending on the atmosphere. Another useful equippment is a shock absorber. When a car hits a bump in the road, the impact shoves the wheel up. In a rigid car with no suspension system to speak of, this means the force of the impact transmits directly to the driver, which can be extremely jarring. Not only that, the impact can also cause a bouncing motion in which the tires lose contact with the road, meaning less control for the driver. Enter the shock absorber, otherwise known as a damper. Actually, the name "shock absorber" is a misnomer, because these devices do not actually absorb shocks. Instead, it's the springs that do this. As the wheels move upward after hitting a bump the springs compress, effectively absorbing the shock of the bump. But as the springs compress, they store potential energy that must be released, or else, it will bounce back and push the vehicle's body further upward than what the bump could cause in the first place. The shock absorbers work to slow down and reduce the magnitude of the bouncing motion by converting the kinetic energy into heat energy that can be dissipated through the hydraulic fluid contained in the absorber assembly. This conversion of energy keeps the vehicle's body from bouncing excessively, providing a more stable ride and helping keep the tires in contact with the road. There are another unique design which is called ABS sensor in the car. An ABS (Anti-lock Braking System) is an enhanced braking system which is commonly found in newer automobiles. An anti-lock brake sensor or ABS sensor is a type of tachometer that measures the rotational speed of a wheel and passes it to the car's Engine Control Module (ECM). The ABS sensor is also called the wheel speed sensor or ABS brake sensor. Since all the wheels do not turn at the same speed, the ABS sensors report the speeds of all the four wheels to the ECM, based on which the ECM determines if the wheels are locking up. The application of the ABS brake is quicker than manual brakes. Due to this, when the ABS is engaged, it emits a grinding noise in some automobiles. Older configurations of ABS had the sensors located outside the wheel hub in parts such as the steering knuckle and differential housing. The ABS sensor is coupled with a ring gear. The ring is mounted on components such as the brake rotor and brake drum. The ABS sensors in newer systems are fitted in the wheel hub assembly itself. Depending on the type of braking system, vehicles may have as few as one or up to four ABS sensors. The ABS sensor usually consists of a toothed ring and a magnet enclosed within a coil. The contact between the ring and the magnet induces an electric field due to which a signal is generated. This signal is then transformed into a digital signal and sent to the ABS controller. The controller then determines the speed of each wheel accordingly. Except these, there are also other engine parts like Control Arm, Brake Pad Sensor, Ball Joint, Automotive Chassis System, Automotive Cooling System, Cooling Fan and Thermostat.
Дата Публикации: 10-01-22
Описание: enkor.net Home theater is difficult to define - it's really just a vague term for a particular approach to home entertainment. Generally speaking, a home theater system is a combination of electronic components designed to recreate the experience of watching a movie in a theater. When you watch a movie on a home theater system, you are more immersed in the experience than when you watch one on an ordinary television. To see how home theaters do this, let's take a look at the original model - the movie theater. When it comes to picture and sound, the theater can offer an amazing experience we just don't get at home. That's usually why people will pay to go to the movies, even though renting a movie is cheaper. There are a few main components that make watching TV and going to the movies very different. One of the biggest differences is the sound experience. When you go to see a movie in a quality movie theater, you'll hear the music, sound effects and dialogue not just from the screen, but all around you. A standard movie theater has three speakers behind the screen - one to the right, one to the left and one in the center - and several other speakers spread out in the rest of the theater. In this surround sound system like 5.1 Home Theater Sound System, you hear different parts of the soundtrack coming from different places. When somebody on the left side of the screen says something, you hear it more from the left speaker. And in a movie like "Star Wars," you hear a rumbling swoosh travel from the front of the theater to the rear as a spaceship flies toward the camera and off the screen. You are more involved in the experience of watching a film because the world of the movie is all around you. The second chief component of the theater experience is the large size of the movie screen. In a theater, the screen takes up most of your field of view, which makes it very easy to lose yourself in the movie. After all, you're sitting in the dark with only one thing to look at, and everything you're looking at seems much bigger than life. We also enjoy going to the movies because we can see everything so well. Film projectors present very large, clear pictures. The detail is much sharper than what we see on an ordinary 19-inch television, and the movement is much more fluid. We may not consciously recognize this, but it does make a significant difference in how we enjoy a movie. When we can see more detail, we are more engrossed in the world of the movie. The most indispensable part of a Home Theater System is the speaker. Speakers are used to connect to a computer to generate sound, which are one of the most common output devices. Some speakers are designed to connect with any kind of sound system, while some can be hooked up only with computers. With the computer speaker like 2.0 Desktop Speaker, the computer's sound card creates a signal that is used to produce sound. The primary objective of speakers is to offer audio output for the listener. The electromagnetic waves are converted into sound waves through the speaker as they are transducers. The devices, like an audio receiver or computer, give audio input to speakers, which may be in the form of analog or digital. The function of the analog speaker is simply to magnify the analog electromagnetic waves into sound waves. The sound waves are produced in analog form, but first, the digital input is converted into an analog signal by digital speakers then the sound waves are generated. The amplitude and frequency define the sound produced by speakers. The frequency determines the pitch of the sound of how high or low it is. For case, a bass guitar or kick drum generates low sounds waves, while a soprano singer's voice produces sounds in the high-frequency range. The sound quality, how clear it will be, depends upon the speaker system's ability; if it is able to accurately reproduce sound frequencies, it can be the best indicator to determine audio quality. There are numerous speakers that consist of different speaker cones, which make them capable of offering more accurate sounds for different ranges. The three-way speakers generally contain a subwoofer like 2.1 Subwoofer Speaker, mid-range speaker, and a tweeter, whereas the two-way speakers have a mid-range speaker and a tweeter. The air pressure created by the speakers' sound waves determines the loudness or amplitude. And also, there are speakers for different shapes like Portable Speaker, Tower Speaker(2.0 Tower Speaker) and speakers for different usages like Multimedia Speaker, Party Speaker and Bluetooth Speaker. Like a sound card of computer and some other audio sources produce the signal low, which may need to be augmented by the speakers. This is the reason, to amplify the signal, most of the external computer speakers use electricity; hence, they are amplified. Speakers that have the ability to increase the sound input are commonly known as active speakers. If a speaker can be plugged into an electrical outlet or consists of volume control, you can easily determine if the speaker is active. The passive speakers are those that do not have any internal amplification; these speakers need a high level of audio input as they do not increase the audio signal. Usually, speakers come in pairs that led to producing stereo sound. It means, on two separate channels, the left and right speakers produce audio. Music sounds much more natural when you use two speakers, as in this condition, our ears hear sounds from the left and right at one time, which makes sounds much more natural. Furthermore, surround systems can produce more realistic sound as they may include four to seven speakers, including a subwoofer.
Дата Публикации: 10-01-22
Описание: cnyxcaps.com The Empty Capsule is a drug form (or galenic form) used when the drug (or any other substance to be used by oral way) it contains, has a strong odor or an unpleasant taste that you wishes to mask. It's also used when the drug has a texture not easy to put in the form of tablet. Normally, the active product must be a dry powder, because the gelatin disaggregates when in contact with water. It's possible to putliquids in a capsule, but only is included in an absorbing substate (aerosil for example), or right before swallowing the capsule (it is the case for essential oils). Therefore, the Gelatin Capsules or Empty Gelatin Capsules are widely used. Nevertheless, the capsules can be filled with oily liquids, but in industrial environment only. It's possible to hide in a capsule a smaller product as a compressed tablet or another smaller capsule, for example for clinical trials (known as in "double blind"). Especially treated capsules "gastro-resistants" or with "enteric coating" allow to avoid the anactivation of a substance by the stomach acidity, or allow to obtain a delayed release, in the intestine. The capsule is mostly a packaging form easy to realize, with a cheap material, from where its success in hospital, in pharmacies, and even at private individuals doing themselves their mixtures of plants. Thanks to the many combinations of colors that it allows, and with the possibility to print logo and reference n°, the capsule makes it possible to personalize a drug or a food complement, with a marketing aim for example. This personalization is also useful for the poisons centers to recognize a product when there is an intoxication There is also many other more "exotic" uses of the capsules. For example, they are used to store electronics components, or fossils of small size. Structure The capsule consists of two encased parts: the "head" and the "body": The body is longer and a little less broad than the head. It is the body that is filled filled with powder, and thus it is the volume of this body which is the normal volume of filling. When one inserts the two parts one in the other (after filling), a light relief allows to block the body in the head, with the result that the filled capsules are less long than the empty capsules. Composition The traditional capsule consists of gelatin of ox or pig (this gelatin is obtained by partial hydrolysis of the collagen contained in the bones or the skin); the gelatin can be added with opacifying products (titanium dioxide for example) and with dyes. It can also be simply left transparent. There is also vegetable capsules, containing modified cellulose (Hydroxypropylmethylcellullose, or "HPMC", or "Hypromellose") which had a certain success at the time of the "mad cow" epidemic (or "ESB|"). It should be noted that the traditional gelatin capsules from now on are guaranteed free from risks related to this disease. The vegetable capsules continue to be preferred for the "bio" products. Finally, there is also capsules made with fish gelatin. Except that, there are other different kinds of capsules like Halal Capsule, Pearl Capsules, Color Capsule, Hpmc Capsules and Pullulan Capsules. Size and weight For the regular capsules, the various sizes go from "000" (largest) to 5 (smallest). There is also much larger capsules, for veterinary use, as well as "lengthened" capsules, or even capsules especially reserved for the clinical trials
Дата Публикации: 10-01-22
Описание: chirimentech.com If you need to replace missing teeth, your oral surgeon may recommend a dental implant. The procedure involves the placement of the implant and the attachment of the abutment and crown. Healing abutments can help in the healing process. It is important to learn more about the procedure and the benefits of the healing abutment. A healing abutment, also known as a healing cap or gingival former, can help promote soft and hard tissue healing around an implant. The healing cap also protects the main part of the implant from plaque and debris accumulations. It is often fitted on top of the implant. It is slightly wider than the implant to help shape the gumline. An oral surgeon can fit the healing abutment in either the one-stage or two-stage procedure. In the one-stage procedure, the oral surgeon will place the implant and the healing cap at the same time. The implant is first inserted into the bone, then the healing cap is attached to it. The healing abutment will protrude through the surface of the gum and stay in place while the dental implant heals. Once the implant and jawbone fully integrate, the healing cap will be removed to gain access to the implant. The abutment will then replace the healing cap. Finally, the crown will be placed over the abutment. In the two-stage procedure, after the oral surgeon inserts the implant into the bone, it is covered with gum tissue and left to heal. After healing, the implant fuses with the bone in the process of osseointegration for several months. The second phase involves making another incision to expose the implant before the healing cap is screwed on it. The healing abutment will help the surrounding gum to heal. After some weeks, the healing cap will be removed before the attachment of the abutment and eventually the crown will be put in place. Some people opt to use the healing abutment because it makes the process shorter. In the one-stage procedure, once the oral surgeon places the healing cap, there is no need for the second surgery to connect the abutment. The healing abutment is removed after the gums heal and then the connecting abutment is fitted before the crown is attached. However, people are usually advised to see an oral surgeon to get information and guidance on the ideal method. Healing abutments should not be reused. Patients should not reuse healing caps. One of the main reasons is because the recreation of the surface of a new abutment is not feasible even with sterilization. Sterilization can also change the initial composition of the titanium surface, which makes the product less effective. Sometimes cleaning may damage the healing cap implant screws. This can make it hard to fix it tightly in an implant. Another equipment Stock Abutments, also called standard abutments, are pre-manufactured abutments, made by dental implant companies to fit an existing implant system. Mass-produced and fitted to the implant, these dental stock abutments are cost-effective but are not custom-fit to the patient. This means that though the implant is less expensive, the result can vary in aesthetic appearance. Smart Abutments, or fitted abutments, are custom-made abutments, created by a dental laboratory using an impression of the individual's mouth. This data, as well as the position of the implant, is then used to create a custom abutment that fits perfectly into the patient's implant and gum line, bringing optimal aesthetic results, albeit with a higher price tag. There are also other Dental Tools or Dental Machine like Dental Implant Healing Cap, Dental Milling Machine, Implant Transfer Coping, Intraoral Scanner, Implant Screwdriver and Milling Bur.
Дата Публикации: 10-01-22
Database (default) | 0.768270 s | |||
---|---|---|---|---|
24.0391 kB | ||||
Исходный пункт | Min | Max | Average | Всего |
SELECT `group_name`, `config_key`, `config_value` FROM `oc2_config` ORDER BY `group_name` ASC, `config_key` ASC (1) |
0.095490 s
|
0.095490 s
|
0.095490 s
|
0.095490 s
|
0.8359 kB
|
0.8359 kB
|
0.8359 kB
|
0.8359 kB
|
|
SELECT `oc2_`.`id_crontab` AS `id_crontab`, `oc2_`.`name` AS `name`, `oc2_`.`period` AS `period`, `oc2_`.`callback` AS `callback`, `oc2_`.`params` AS `params`, `oc2_`.`description` AS `description`, `oc2_`.`date_created` AS `date_created`, `oc2_`.`date_started` AS `date_started`, `oc2_`.`date_finished` AS `date_finished`, `oc2_`.`date_next` AS `date_next`, `oc2_`.`times_executed` AS `times_executed`, `oc2_`.`output` AS `output`, `oc2_`.`running` AS `running`, `oc2_`.`active` AS `active` FROM `oc2_crontab` AS `oc2_` WHERE `active` = 1 AND (`date_next` <= '2024-10-15 15:53:30' OR `date_next` IS NULL) (1) |
0.090500 s
|
0.090500 s
|
0.090500 s
|
0.090500 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SELECT `oc2_category`.`id_category` AS `id_category`, `oc2_category`.`name` AS `name`, `oc2_category`.`order` AS `order`, `oc2_category`.`created` AS `created`, `oc2_category`.`id_category_parent` AS `id_category_parent`, `oc2_category`.`parent_deep` AS `parent_deep`, `oc2_category`.`seoname` AS `seoname`, `oc2_category`.`description` AS `description`, `oc2_category`.`price` AS `price`, `oc2_category`.`last_modified` AS `last_modified`, `oc2_category`.`has_image` AS `has_image` FROM `oc2_categories` AS `oc2_category` WHERE `seoname` IS NULL LIMIT 1 (1) |
0.002114 s
|
0.002114 s
|
0.002114 s
|
0.002114 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SHOW FULL COLUMNS FROM `oc2_ads` (1) |
0.004078 s
|
0.004078 s
|
0.004078 s
|
0.004078 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SELECT `oc2_location`.`id_location` AS `id_location`, `oc2_location`.`name` AS `name`, `oc2_location`.`order` AS `order`, `oc2_location`.`id_location_parent` AS `id_location_parent`, `oc2_location`.`parent_deep` AS `parent_deep`, `oc2_location`.`seoname` AS `seoname`, `oc2_location`.`description` AS `description`, `oc2_location`.`last_modified` AS `last_modified`, `oc2_location`.`has_image` AS `has_image`, `oc2_location`.`latitude` AS `latitude`, `oc2_location`.`longitude` AS `longitude`, `oc2_location`.`id_geoname` AS `id_geoname`, `oc2_location`.`fcodename_geoname` AS `fcodename_geoname` FROM `oc2_locations` AS `oc2_location` WHERE `seoname` IS NULL LIMIT 1 (1) |
0.000525 s
|
0.000525 s
|
0.000525 s
|
0.000525 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SHOW FULL COLUMNS FROM `oc2_users` (1) |
0.001720 s
|
0.001720 s
|
0.001720 s
|
0.001720 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SELECT `oc2_user`.`id_user` AS `id_user`, `oc2_user`.`name` AS `name`, `oc2_user`.`seoname` AS `seoname`, `oc2_user`.`email` AS `email`, `oc2_user`.`password` AS `password`, `oc2_user`.`description` AS `description`, `oc2_user`.`status` AS `status`, `oc2_user`.`id_role` AS `id_role`, `oc2_user`.`id_location` AS `id_location`, `oc2_user`.`created` AS `created`, `oc2_user`.`last_modified` AS `last_modified`, `oc2_user`.`logins` AS `logins`, `oc2_user`.`last_login` AS `last_login`, `oc2_user`.`last_ip` AS `last_ip`, `oc2_user`.`user_agent` AS `user_agent`, `oc2_user`.`token` AS `token`, `oc2_user`.`token_created` AS `token_created`, `oc2_user`.`token_expires` AS `token_expires`, `oc2_user`.`api_token` AS `api_token`, `oc2_user`.`hybridauth_provider_name` AS `hybridauth_provider_name`, `oc2_user`.`hybridauth_provider_uid` AS `hybridauth_provider_uid`, `oc2_user`.`subscriber` AS `subscriber`, `oc2_user`.`rate` AS `rate`, `oc2_user`.`has_image` AS `has_image`, `oc2_user`.`failed_attempts` AS `failed_attempts`, `oc2_user`.`last_failed` AS `last_failed`, `oc2_user`.`notification_date` AS `notification_date`, `oc2_user`.`device_id` AS `device_id`, `oc2_user`.`stripe_user_id` AS `stripe_user_id`, `oc2_user`.`google_authenticator` AS `google_authenticator` FROM `oc2_users` AS `oc2_user` WHERE `seoname` = 'tfhj299' AND `status` = 1 LIMIT 1 (2) |
0.000808 s
|
0.005932 s
|
0.003370 s
|
0.006740 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
1.4063 kB
|
|
SELECT COUNT(`oc2_ad`.`id_ad`) AS `records_found` FROM `oc2_ads` AS `oc2_ad` WHERE `id_user` = '514' AND `status` = 1 ORDER BY `created` DESC (1) |
0.085281 s
|
0.085281 s
|
0.085281 s
|
0.085281 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SELECT `oc2_ad`.`id_ad` AS `id_ad`, `oc2_ad`.`id_user` AS `id_user`, `oc2_ad`.`id_category` AS `id_category`, `oc2_ad`.`id_location` AS `id_location`, `oc2_ad`.`title` AS `title`, `oc2_ad`.`seotitle` AS `seotitle`, `oc2_ad`.`description` AS `description`, `oc2_ad`.`address` AS `address`, `oc2_ad`.`latitude` AS `latitude`, `oc2_ad`.`longitude` AS `longitude`, `oc2_ad`.`price` AS `price`, `oc2_ad`.`phone` AS `phone`, `oc2_ad`.`website` AS `website`, `oc2_ad`.`ip_address` AS `ip_address`, `oc2_ad`.`created` AS `created`, `oc2_ad`.`published` AS `published`, `oc2_ad`.`featured` AS `featured`, `oc2_ad`.`last_modified` AS `last_modified`, `oc2_ad`.`status` AS `status`, `oc2_ad`.`has_images` AS `has_images`, `oc2_ad`.`stock` AS `stock`, `oc2_ad`.`rate` AS `rate`, `oc2_ad`.`favorited` AS `favorited`, `oc2_ad`.`cf_doppole` AS `cf_doppole` FROM `oc2_ads` AS `oc2_ad` WHERE `id_user` = '514' AND `status` = 1 ORDER BY `created` DESC LIMIT 10 OFFSET 0 (1) |
0.001588 s
|
0.001588 s
|
0.001588 s
|
0.001588 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SELECT `oc2_c`.`id_category`, COUNT("a.id_ad") AS `count` FROM `oc2_categories` AS `oc2_c` JOIN `oc2_ads` AS `oc2_a` USING (`id_category`) WHERE `oc2_a`.`id_category` = oc2_c.id_category AND IF(0 <> 0, DATE_ADD( published, INTERVAL 0 DAY), DATE_ADD( NOW(), INTERVAL 1 DAY)) > '2024-10-15 15:53:34' AND `oc2_a`.`status` = 1 GROUP BY `oc2_c`.`id_category` ORDER BY `oc2_c`.`order` ASC (1) |
0.139514 s
|
0.139514 s
|
0.139514 s
|
0.139514 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SELECT `oc2_category`.`id_category` AS `id_category`, `oc2_category`.`name` AS `name`, `oc2_category`.`order` AS `order`, `oc2_category`.`created` AS `created`, `oc2_category`.`id_category_parent` AS `id_category_parent`, `oc2_category`.`parent_deep` AS `parent_deep`, `oc2_category`.`seoname` AS `seoname`, `oc2_category`.`description` AS `description`, `oc2_category`.`price` AS `price`, `oc2_category`.`last_modified` AS `last_modified`, `oc2_category`.`has_image` AS `has_image` FROM `oc2_categories` AS `oc2_category` WHERE `oc2_category`.`id_category` = '2' LIMIT 1 (11) |
0.000352 s
|
0.078802 s
|
0.020485 s
|
0.225330 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
7.7344 kB
|
|
SELECT `oc2_category`.`id_category` AS `id_category`, `oc2_category`.`name` AS `name`, `oc2_category`.`order` AS `order`, `oc2_category`.`created` AS `created`, `oc2_category`.`id_category_parent` AS `id_category_parent`, `oc2_category`.`parent_deep` AS `parent_deep`, `oc2_category`.`seoname` AS `seoname`, `oc2_category`.`description` AS `description`, `oc2_category`.`price` AS `price`, `oc2_category`.`last_modified` AS `last_modified`, `oc2_category`.`has_image` AS `has_image` FROM `oc2_categories` AS `oc2_category` WHERE `id_category` != 1 AND `parent_deep` IN (0, 1) ORDER BY `order` ASC (1) |
0.010788 s
|
0.010788 s
|
0.010788 s
|
0.010788 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SELECT `oc2_category`.`id_category` AS `id_category`, `oc2_category`.`name` AS `name`, `oc2_category`.`order` AS `order`, `oc2_category`.`created` AS `created`, `oc2_category`.`id_category_parent` AS `id_category_parent`, `oc2_category`.`parent_deep` AS `parent_deep`, `oc2_category`.`seoname` AS `seoname`, `oc2_category`.`description` AS `description`, `oc2_category`.`price` AS `price`, `oc2_category`.`last_modified` AS `last_modified`, `oc2_category`.`has_image` AS `has_image` FROM `oc2_categories` AS `oc2_category` WHERE `id_category_parent` = '2' AND `id_category` != '2' LIMIT 1 (1) |
0.000402 s
|
0.000402 s
|
0.000402 s
|
0.000402 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
|
SELECT `oc2_location`.`id_location` AS `id_location`, `oc2_location`.`name` AS `name`, `oc2_location`.`order` AS `order`, `oc2_location`.`id_location_parent` AS `id_location_parent`, `oc2_location`.`parent_deep` AS `parent_deep`, `oc2_location`.`seoname` AS `seoname`, `oc2_location`.`description` AS `description`, `oc2_location`.`last_modified` AS `last_modified`, `oc2_location`.`has_image` AS `has_image`, `oc2_location`.`latitude` AS `latitude`, `oc2_location`.`longitude` AS `longitude`, `oc2_location`.`id_geoname` AS `id_geoname`, `oc2_location`.`fcodename_geoname` AS `fcodename_geoname` FROM `oc2_locations` AS `oc2_location` WHERE `oc2_location`.`id_location` = '0' LIMIT 1 (10) |
0.000292 s
|
0.085535 s
|
0.010420 s
|
0.104200 s
|
0.7031 kB
|
0.7031 kB
|
0.7031 kB
|
7.0313 kB
|
Kohana | 0.272610 s | |||
---|---|---|---|---|
138.9688 kB | ||||
Исходный пункт | Min | Max | Average | Всего |
find_file (211) |
0.000013 s
|
0.089106 s
|
0.001292 s
|
0.272610 s
|
0.4688 kB
|
2.7969 kB
|
0.6586 kB
|
138.9688 kB
|
Requests | 6.400230 s | |||
---|---|---|---|---|
1,589.8047 kB | ||||
Исходный пункт | Min | Max | Average | Всего |
"user/tfhj299" (1) |
6.402470 s
|
6.402470 s
|
6.402470 s
|
6.402470 s
|
1,600.8359 kB
|
1,600.8359 kB
|
1,600.8359 kB
|
1,600.8359 kB
|
Запуск приложения (1) | 14.198900 s | 14.198900 s | 14.198900 s | 14.198900 s |
---|---|---|---|---|
3,437.3359 kB | 3,437.3359 kB | 3,437.3359 kB | 3,437.3359 kB |
DOCROOT/index.php |
APPPATH/bootstrap.php |
APPPATH/kohana/system/classes/Kohana/Core.php |
APPPATH/common/classes/kohana.php |
APPPATH/classes/kohana/exception.php |
APPPATH/kohana/system/classes/Kohana/Kohana/Exception.php |
APPPATH/kohana/system/classes/Log.php |
APPPATH/kohana/system/classes/Kohana/Log.php |
APPPATH/kohana/system/classes/Config.php |
APPPATH/kohana/system/classes/Kohana/Config.php |
APPPATH/kohana/system/classes/Log/File.php |
APPPATH/kohana/system/classes/Kohana/Log/File.php |
APPPATH/kohana/system/classes/Log/Writer.php |
APPPATH/kohana/system/classes/Kohana/Log/Writer.php |
APPPATH/kohana/system/classes/Config/File.php |
APPPATH/kohana/system/classes/Kohana/Config/File.php |
APPPATH/kohana/system/classes/Kohana/Config/File/Reader.php |
APPPATH/kohana/system/classes/Kohana/Config/Reader.php |
APPPATH/kohana/system/classes/Kohana/Config/Source.php |
APPPATH/common/modules/widgets/init.php |
APPPATH/common/modules/widgets/classes/widgets.php |
APPPATH/common/modules/imagefly/init.php |
APPPATH/kohana/system/classes/Route.php |
APPPATH/kohana/system/classes/Kohana/Route.php |
APPPATH/classes/core.php |
APPPATH/common/classes/oc/core.php |
APPPATH/kohana/system/classes/Cookie.php |
APPPATH/kohana/system/classes/Kohana/Cookie.php |
APPPATH/common/classes/arr.php |
APPPATH/kohana/system/classes/Kohana/Arr.php |
APPPATH/kohana/modules/cache/config/cache.php |
APPPATH/config/cache.php |
APPPATH/kohana/system/classes/Config/Group.php |
APPPATH/kohana/system/classes/Kohana/Config/Group.php |
APPPATH/common/classes/cache.php |
APPPATH/kohana/modules/cache/classes/Kohana/Cache.php |
APPPATH/common/classes/configdb.php |
APPPATH/kohana/modules/database/classes/Config/Database.php |
APPPATH/kohana/modules/database/classes/Kohana/Config/Database.php |
APPPATH/kohana/modules/database/classes/Config/Database/Writer.php |
APPPATH/kohana/modules/database/classes/Kohana/Config/Database/Writer.php |
APPPATH/kohana/modules/database/classes/Config/Database/Reader.php |
APPPATH/kohana/modules/database/classes/Kohana/Config/Database/Reader.php |
APPPATH/kohana/system/classes/Kohana/Config/Writer.php |
APPPATH/kohana/modules/database/classes/DB.php |
APPPATH/kohana/modules/database/classes/Kohana/DB.php |
APPPATH/kohana/modules/database/classes/Database/Query/Builder/Select.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/Query/Builder/Select.php |
APPPATH/kohana/modules/database/classes/Database/Query/Builder/Where.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/Query/Builder/Where.php |
APPPATH/kohana/modules/database/classes/Database/Query/Builder.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/Query/Builder.php |
APPPATH/classes/database/query.php |
APPPATH/common/classes/oc/database/query.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/Query.php |
APPPATH/kohana/modules/database/classes/Database.php |
APPPATH/kohana/modules/database/classes/Kohana/Database.php |
APPPATH/kohana/modules/database/config/database.php |
APPPATH/config/database.php |
APPPATH/classes/database/mysqli.php |
APPPATH/common/classes/oc/database/mysqli.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/MySQLi.php |
APPPATH/kohana/system/classes/Profiler.php |
APPPATH/kohana/system/classes/Kohana/Profiler.php |
APPPATH/classes/database/mysqli/result.php |
APPPATH/common/classes/oc/database/mysqli/result.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/MySQLi/Result.php |
APPPATH/kohana/modules/database/classes/Database/Result.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/Result.php |
APPPATH/kohana/modules/auth/config/auth.php |
APPPATH/kohana/system/classes/Session.php |
APPPATH/kohana/system/classes/Kohana/Session.php |
APPPATH/config/auth.php |
APPPATH/common/classes/i18n.php |
APPPATH/common/classes/oc/i18n.php |
APPPATH/kohana/system/classes/Kohana/I18n.php |
APPPATH/config/routes.php |
APPPATH/common/classes/url.php |
APPPATH/kohana/system/classes/Kohana/URL.php |
APPPATH/common/classes/theme.php |
APPPATH/common/classes/oc/theme.php |
APPPATH/common/classes/request.php |
APPPATH/kohana/system/classes/Kohana/Request.php |
APPPATH/kohana/system/classes/HTTP/Request.php |
APPPATH/kohana/system/classes/Kohana/HTTP/Request.php |
APPPATH/kohana/system/classes/HTTP/Message.php |
APPPATH/kohana/system/classes/Kohana/HTTP/Message.php |
DOCROOT/themes/default/init.php |
DOCROOT/themes/default/options.php |
APPPATH/kohana/modules/auth/classes/Auth.php |
APPPATH/kohana/modules/auth/classes/Kohana/Auth.php |
APPPATH/common/classes/auth/oc.php |
APPPATH/kohana/system/config/session.php |
APPPATH/kohana/modules/database/config/session.php |
APPPATH/kohana/system/classes/Session/Native.php |
APPPATH/kohana/system/classes/Kohana/Session/Native.php |
APPPATH/kohana/system/classes/Encrypt.php |
APPPATH/kohana/system/classes/Kohana/Encrypt.php |
APPPATH/classes/form.php |
APPPATH/common/classes/oc/form.php |
APPPATH/kohana/system/classes/Kohana/Form.php |
APPPATH/common/classes/alert.php |
APPPATH/common/modules/cron/classes/cron.php |
APPPATH/common/modules/cron/classes/kohana/cron.php |
APPPATH/classes/orm.php |
APPPATH/common/classes/oc/orm.php |
APPPATH/kohana/modules/orm/classes/Kohana/ORM.php |
APPPATH/kohana/system/classes/Model.php |
APPPATH/kohana/system/classes/Kohana/Model.php |
APPPATH/kohana/system/classes/Inflector.php |
APPPATH/kohana/system/classes/Kohana/Inflector.php |
APPPATH/kohana/system/config/inflector.php |
APPPATH/common/classes/date.php |
APPPATH/kohana/system/classes/Kohana/Date.php |
APPPATH/kohana/system/classes/HTTP.php |
APPPATH/kohana/system/classes/Kohana/HTTP.php |
APPPATH/kohana/system/classes/HTTP/Header.php |
APPPATH/kohana/system/classes/Kohana/HTTP/Header.php |
APPPATH/kohana/system/classes/Request/Client/Internal.php |
APPPATH/kohana/system/classes/Kohana/Request/Client/Internal.php |
APPPATH/kohana/system/classes/Request/Client.php |
APPPATH/kohana/system/classes/Kohana/Request/Client.php |
APPPATH/kohana/system/classes/Response.php |
APPPATH/kohana/system/classes/Kohana/Response.php |
APPPATH/kohana/system/classes/HTTP/Response.php |
APPPATH/kohana/system/classes/Kohana/HTTP/Response.php |
APPPATH/classes/controller/user.php |
APPPATH/classes/controller.php |
APPPATH/kohana/system/classes/Kohana/Controller.php |
APPPATH/classes/model/category.php |
APPPATH/classes/model/location.php |
APPPATH/classes/model/ad.php |
APPPATH/classes/model/coupon.php |
APPPATH/common/classes/model/oc/coupon.php |
APPPATH/classes/view.php |
APPPATH/common/classes/oc/view.php |
APPPATH/kohana/system/classes/Kohana/View.php |
APPPATH/common/modules/breadcrumbs/classes/breadcrumbs.php |
APPPATH/common/modules/breadcrumbs/classes/breadcrumb.php |
APPPATH/classes/model/user.php |
APPPATH/common/classes/model/oc/user.php |
APPPATH/kohana/modules/database/classes/Database/Expression.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/Expression.php |
APPPATH/common/classes/pagination.php |
APPPATH/common/modules/pagination/classes/kohana/pagination.php |
APPPATH/common/modules/pagination/config/pagination.php |
APPPATH/common/classes/seo.php |
DOCROOT/themes/default/views/main.php |
DOCROOT/themes/default/views/header_metas.php |
APPPATH/common/classes/html.php |
APPPATH/common/classes/oc/html.php |
APPPATH/kohana/system/classes/Kohana/HTML.php |
APPPATH/common/classes/model/forum.php |
APPPATH/common/classes/valid.php |
APPPATH/kohana/system/classes/Kohana/Valid.php |
APPPATH/common/views/analytics.php |
APPPATH/common/views/alert_terms.php |
DOCROOT/themes/default/views/header.php |
APPPATH/kohana/modules/database/classes/Database/Query/Builder/Join.php |
APPPATH/kohana/modules/database/classes/Kohana/Database/Query/Builder/Join.php |
APPPATH/common/classes/menu.php |
APPPATH/common/views/nav_link.php |
DOCROOT/themes/default/views/widget_login.php |
APPPATH/common/views/pages/auth/login-form.php |
APPPATH/common/classes/csrf.php |
APPPATH/classes/text.php |
APPPATH/common/classes/oc/text.php |
APPPATH/kohana/system/classes/Kohana/Text.php |
APPPATH/common/views/pages/auth/social.php |
APPPATH/common/views/pages/auth/forgot-form.php |
APPPATH/common/views/pages/auth/register-form.php |
APPPATH/common/classes/captcha.php |
APPPATH/common/classes/oc/captcha.php |
APPPATH/common/views/breadcrumbs.php |
DOCROOT/themes/default/views/pages/user/profile.php |
APPPATH/kohana/modules/image/config/image.php |
APPPATH/common/views/sidebar.php |
APPPATH/common/modules/widgets/classes/widget.php |
APPPATH/common/modules/widgets/classes/widget/share.php |
APPPATH/common/modules/widgets/classes/widget/rss.php |
APPPATH/common/classes/feed.php |
APPPATH/kohana/system/classes/Kohana/Feed.php |
APPPATH/common/modules/widgets/views/widget/widget_share.php |
APPPATH/common/views/share.php |
APPPATH/common/modules/widgets/views/widget/widget_rss.php |
DOCROOT/themes/default/views/footer.php |
APPPATH/common/views/profiler.php |
APPPATH/kohana/system/views/profiler/style.css |
Core |
date |
ereg |
libxml |
openssl |
pcre |
sqlite3 |
zlib |
bz2 |
calendar |
ctype |
curl |
hash |
filter |
ftp |
gettext |
gmp |
SPL |
iconv |
pcntl |
readline |
Reflection |
session |
standard |
shmop |
SimpleXML |
mbstring |
tokenizer |
xml |
cgi-fcgi |
bcmath |
dom |
fileinfo |
gd |
intl |
json |
ldap |
exif |
mcrypt |
mysql |
mysqli |
PDO |
pdo_mysql |
pdo_sqlite |
Phar |
posix |
pspell |
soap |
sockets |
sysvmsg |
sysvsem |
sysvshm |
tidy |
wddx |
XCache |
xmlreader |
xmlwriter |
xsl |
zip |
mhash |
XCache Optimizer |
XCache Cacher |
XCache Coverager |
Zend OPcache |
auth_redirect |
string(42) "http://board.flexi-soft.in.ua/user/tfhj299" |
csrf-token-login |
string(30) "kJ66qkAP2M9vepfJ0hjsNDXfWciC1q" |
csrf-token-forgot |
string(30) "LWqkHaQ1k8EHReROMe7rZemBBK7rwk" |
csrf-token-register |
string(26) "8MmKsaUdbLmjeLPWsVB5Jwfs3b" |
alert_data |
array(0) |
SERVER_SIGNATURE |
string(0) "" |
UNIQUE_ID |
string(27) "Zw5lwWC2LG6o3WFCd4SrLgAAAEc" |
HTTP_USER_AGENT |
string(40) "CCBot/2.0 (https://commoncrawl.org/faq/)" |
HTTP_HOST |
string(22) "board.flexi-soft.in.ua" |
SERVER_PORT |
string(2) "80" |
PHPRC |
string(35) "/var/www/19218-saniyaw/data/php-bin" |
REDIRECT_HANDLER |
string(24) "application/x-httpd-php5" |
PHP_INI_SCAN_DIR |
string(53) "/var/www/19218-saniyaw/data/php-bin/flexi-soft.in.ua:" |
DOCUMENT_ROOT |
string(48) "/var/www/19218-saniyaw/data/www/flexi-soft.in.ua" |
SCRIPT_FILENAME |
string(64) "/var/www/19218-saniyaw/data/www/board.flexi-soft.in.ua/index.php" |
REQUEST_URI |
string(13) "/user/tfhj299" |
SCRIPT_NAME |
string(10) "/index.php" |
HTTP_CONNECTION |
string(5) "close" |
REMOTE_PORT |
string(5) "39398" |
PATH |
string(28) "/usr/local/bin:/usr/bin:/bin" |
CONTEXT_PREFIX |
string(9) "/php-bin/" |
SERVER_ADMIN |
string(26) "webmaster@flexi-soft.in.ua" |
PWD |
string(47) "/var/www/php-bin/19218-saniyaw/flexi-soft.in.ua" |
REQUEST_SCHEME |
string(4) "http" |
REDIRECT_STATUS |
string(3) "200" |
HTTP_IF_MODIFIED_SINCE |
string(29) "Mon, 24 Jun 2024 20:17:51 GMT" |
HTTP_ACCEPT_LANGUAGE |
string(14) "en-US,en;q=0.5" |
HTTP_ACCEPT |
string(63) "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8" |
REMOTE_ADDR |
string(14) "44.200.122.214" |
SERVER_NAME |
string(22) "board.flexi-soft.in.ua" |
SHLVL |
string(1) "1" |
SERVER_SOFTWARE |
string(72) "Apache/2.4.6 (CloudLinux) OpenSSL/1.0.2k-fips mod_fcgid/2.3.9 PHP/5.4.16" |
QUERY_STRING |
string(0) "" |
SERVER_ADDR |
string(9) "127.0.0.1" |
HTTP_X_FORWARDED_PORT |
string(2) "80" |
GATEWAY_INTERFACE |
string(7) "CGI/1.1" |
SERVER_PROTOCOL |
string(8) "HTTP/1.0" |
HTTP_ACCEPT_ENCODING |
string(7) "br,gzip" |
REDIRECT_URL |
string(10) "/index.php" |
REQUEST_METHOD |
string(3) "GET" |
CONTEXT_DOCUMENT_ROOT |
string(48) "/var/www/php-bin/19218-saniyaw/flexi-soft.in.ua/" |
HTTP_X_FORWARDED_PROTO |
string(4) "http" |
_ |
string(16) "/usr/bin/php-cgi" |
ORIG_SCRIPT_FILENAME |
string(51) "/var/www/php-bin/19218-saniyaw/flexi-soft.in.ua/php" |
ORIG_PATH_INFO |
string(10) "/index.php" |
ORIG_PATH_TRANSLATED |
string(64) "/var/www/19218-saniyaw/data/www/board.flexi-soft.in.ua/index.php" |
ORIG_SCRIPT_NAME |
string(12) "/php-bin/php" |
PHP_SELF |
string(10) "/index.php" |
REQUEST_TIME_FLOAT |
float 1728996803,5569 |
REQUEST_TIME |
integer 1728996803 |